Effect of Machine Feed Rate on Kerf-Width, Material Removal Rate, and Surface Roughness in Machining of Al/SiC Composite Material with Wire Electrical Discharge Machine

[1] Stavitskii, I. B. “Electrophysical and electrochemical methods of material processing”, Nauka Obraz., no. 10, 2004. http://technomag.edu.ru/doc/46142.html.Search in Google Scholar

[2] Ablyazm, T. R., Khanov, A. M., Khurmatullin, O. G. “Sovremennye podkhody i tekhnologii elektroerozionnoi obarabotki materialov (Modern Approaches and Technologies of EDM Processing of the Materials)”, Perm: Perm. Nats. Issled. Politekh. Univ., 2012.Search in Google Scholar

[3] Ho, K. H., Newman, S. T., Rahimifard, S., Allen, R. D. “State of the art in wire electrical discharge machining (WEDM)”, International Journal of Machine Tools and Manufacture 44, pp. 1247 – 1259, 2004. DOI: 10.1016/j.ijmachtools.2004.04.01710.1016/j.ijmachtools.2004.04.017Search in Google Scholar

[4] Sadiq, M. A., Rahman, M., Lim, H. S. “Study of WEDM parameter phenomena for micro fabrication”, International Journal of Manufacturing Technology and Management 13 (2–4), pp. 226 – 240, 2008, DOI: 10.1504/IJMTM.2008.01677310.1504/IJMTM.2008.016773Search in Google Scholar

[5] Miller S. F., Kao, C. C, Shih, A. J., Qu, J. “Investigation of wire electrical discharge machining of thin cross-sections and compliant mechanisms”. International Journal of Machine Tools and Manufacturing 45, pp. 1717–1725, 2005, DOI: https://doi.org/10.1016/j.ijmachtools.2005.03.00310.1016/j.ijmachtools.2005.03.003Search in Google Scholar

[6] De, D., Nandi, T., Bandyopadhyay, A. “Parametric study for wire cut electrical discharge machining of sintered titanium”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp. 17 – 38, 2019. DOI: https: 10.2478/scjme-2019-000210.2478/scjme-2019-0002Search in Google Scholar

[7] Raturi, H. P., Prasad, L., Pokhriyal, M., Tirth, V. “An estimating the effect of process parameters on metal removal rate and surface roughness in WEDM of composite AL6063/SIC/AL2O3 by Taguchi Method”, Strojnícky časopis – Journal of Mechanical Engineering 67 (2), pp. 25 – 36, 2017. DOI: 10.1515/scjme-2017-001510.1515/scjme-2017-0015Search in Google Scholar

[8] Lal, S., Kumar, S., Khan, Z. A., Siddiquee, A. N. “Wire electrical discharge machining of AA7075/SiC/Al2O3 hybrid composite fabricated by inert gas-assisted electromagnetic stir casting process”, Journal of the Brazilian Society of Mechanical Sciences and Engineering 36, pp. 335 – 346, 2014. DOI: 10.1007/s40430-013-0087-x10.1007/s40430-013-0087-xSearch in Google Scholar

[9] Hemalatha, K., Venkatachalapathy, V. S. K., Alagumurthy, N. “Surface Integrity analysis in Wire-Cut Electric Discharge Machining of Al 6063/Al2O3 Metal Matrix Composite through Response Surface Methodology”, International Journal of Scientific & Engineering Research 5 (12), pp. 104 – 110, 2014.10.4028/www.scientific.net/AMM.592-594.534Search in Google Scholar

[10] Satishkumar, D., Kanthababu, M., Vajjiravelu, V., Anburaj, R., Sundarrajan, N.T., Arul, H. “Investigation of wire electrical discharge machining characteristics of Al6063/SiCp composites”, The International Journal of Advanced Manufacturing Technologym 56, pp. 975–986, 2011. DOI: 10.1007/s00170-011-3242-510.1007/s00170-011-3242-5Search in Google Scholar

[11] Meena, K. L., Manna, A., Banwati, S. S., Jaswanti. “Effect of wire feed rate and wire tension during machining of pr-Al-SiC-MMCs by WEDM”, European Journal of Engineering and Technology, Vol.1 (1), pp. 1 – 13, 2013.10.12691/ajme-1-1-3Search in Google Scholar

[12] Modi, M., Agarwal, G., Patil, V. “Study and analysis of Wire Electrical Discharge Machining and its process parameters”, International journal of scientific & technology research 8 (9), pp. 1144 – 45, 2019. DOI: http://www.ijstr.org/research-paper-publishing.php?month=sep2019Search in Google Scholar

[13] Modi, M., Agarwal, G., Chaugaonkar, S. D. “Grey-WPCA Based parametric-optimization and modelling of chromium Powder Mixed Surface electro Discharge Diamond Grinding of Inconel 600 using RSM”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 65 – 88, 2019. DOI: 10.2478/scjme-2019-004410.2478/scjme-2019-0044Search in Google Scholar

[14] Fard, R. K., Afza, R. A., Teimouri, R. “Experimental investigation, intelligent modelling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite”, Journal of Manufacturing Processes 15 (4), pp. 483 – 493, 2013. DOI: 10.1016/j.jmapro.2013.09.00210.1016/j.jmapro.2013.09.002Search in Google Scholar

[15] Madhavadev, P., Vijayan, K., Senthilkumar, M. “Development of Numerical Model and Comparison with the Analytical Model for Predicting the Wire Effects in Wire Electric Discharge Grinding”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 69 – 80, 2018. DOI: 10.2478/scjme-2018-000710.2478/scjme-2018-0007Search in Google Scholar

[16] Gauri, S. K., Chakraborty, S. “A study on the performance of some multi-response optimisation methods for WEDM processes”, The International Journal of Advanced Manufacturing Technology 49, pp. 155 – 166, 2010. DOI: /10.1007/s00170-009-2391-210.1007/s00170-009-2391-2Search in Google Scholar

[17] Phate, M. R., Toney, S. B., Phate, V.R. “Analysis of Machining Parameters in WEDM of Al/SiCp20 MMC Using Taguchi-Based Grey-Fuzzy Approach”, Modelling and Simulation in Engineering, pp: 1 – 14, 2019. DOI: 10.1155/2019/1483169.10.1155/2019/1483169Search in Google Scholar

[18] Modi, M., Agarwal, G. “Integrated Statistical Methodology for optimizing machining parameters in SiC Powder Mixed - EDDSG process to machine Ti6Al4V”, Materiali in Tehnologije / Materials and Technology Journal 53 (3), pp. 357 – 366, 2019. DOI: 10.17222/mit.2018.194.10.17222/mit.2018.194Search in Google Scholar

[19] Modi, M., Agarwal, G., Patil, V., Khare, A., Shukla, S., Sankhala, A. “Modeling and Analysis of Turning Process on Lathe Machine by Taguchi and ANOVA Approach” International Journal of Scientific & Technology Research 8 (10), pp. 1466 – 707, 2019. DOI: http://www.ijstr.org/research-paper-publishing.php?month=oct2019Search in Google Scholar

[20] Modi, M., Agarwal, G., Patil, V., Bhatia, U., Pancholi, R. “Parametric Optimization in Drilling of Al–SiC Composite Using Taguchi Method” International Journal of Scientific & Technology Research 8 (9), pp. 2019 – 22, 2019. DOI: http://www.ijstr.org/research-paper-publishing.php?month=sep2019Search in Google Scholar

[21] Modi, M., Agarwal, G. “Powder Mixed Electro Discharge Diamond Surface Grinding Process: Modelling, Comparative analysis and Multi-output optimization using Weighted Principal Components analysis”, SV-Journal of Mechanical Engineering 59 (12), pp. 735 – 747, 2013. DOI: 10.5545/sv-jme.2013.114610.5545/sv-jme.2013.1146Search in Google Scholar

[22] Modi, M., Agarwal, G. “Optimization of Electro-Discharge Diamond Surface Grinding Process Parameters with Multiple Performance Characteristics of Ti-6Al-4V using Grey-Taguchi approach”, International Journal of Advanced Materials Research 622 – 623, pp. 14 – 18, 2012. DOI: 10.4028/www.scientific.net/AMR.622-623.1410.4028/www.scientific.net/AMR.622-623.14Search in Google Scholar

[23] Kodalagara, P. S., Nottath, R., Jose, M. “Material removal characteristics of micro slot (kerf) geometry in μ-WEDM on aluminium”, International Journal of Advanced Manufacturing Technology 51, pp. 611 – 626, 2010. DOI: 10.1007/s00170-010-2645-z.10.1007/s00170-010-2645-zSearch in Google Scholar

[24] Rao, P. S., Ramji, K., Satyanarayan, B. “A Prediction of Material removal rate for Aluminum BIS-24345 Alloy in wire-cut EDM”, International Journal of Engineering Science and Technology 2 (12), pp. 7729 – 7739, 2010.Search in Google Scholar