<abstract xmlns="http://www.w3.org/1999/xhtml"> In the work, adsorption of Cu2+ ions onto almond shell were investigated under different operational conditions. Almond shell was used without any pretreatment prior to the tests. The optimum conditions for adsorption of Cu2+ ions through almond shell were determined to be; pH 5.0, temperature 20°C, shaking rate 125 rpm, sorbent dose 0.3 g and initial Cu2+ ion concentration 50 mg/dm3. The equilibrium duration of the system was 60 minutes. The sorption capacities of the sorbents were predicted with the aid of equilibrium and kinetic models. The interactions of peanut shell with metal ions were constituted by SEM, EDX, FT-IR, XRD and AFM. The pseudo-first-order, pseudo-second-order, Weber-Morris, Elovich model and Bangham kinetic models were applied to test the experimental data. The Cu+2 ions adsorption onto almond shell was better defined by the pseudo-second-order kinetic model, for initial pH. The equilibrium data were evaluated using Langmuir, Freundlich, Temkin, D-R and Harkins Jura isotherms. The highest R2 value in isotherm studies was obtained from Langmiur isotherm (R2 = 0.98) for the inlet concentration.</abstract>

In the work, adsorption of Cu2+ ions onto almond shell were investigated under different operational conditions. Almond shell was used without any pretreatment prior to the tests. The optimum conditions for adsorption of Cu2+ ions through almond shell were determined to be; pH 5.0, temperature 20°C, shaking rate 125 rpm, sorbent dose 0.3 g and initial Cu2+ ion concentration 50 mg/dm3. The equilibrium duration of the system was 60 minutes. The sorption capacities of the sorbents were predicted with the aid of equilibrium and kinetic models. The interactions of peanut shell with metal ions were constituted by SEM, EDX, FT-IR, XRD and AFM. The pseudo-first-order, pseudo-second-order, Weber-Morris, Elovich model and Bangham kinetic models were applied to test the experimental data. The Cu+2 ions adsorption onto almond shell was better defined by the pseudo-second-order kinetic model, for initial pH. The equilibrium data were evaluated using Langmuir, Freundlich, Temkin, D-R and Harkins Jura isotherms. The highest R2 value in isotherm studies was obtained from Langmiur isotherm (R2 = 0.98) for the inlet concentration.

Kinetic and Isotherm Analysis of Cu(II) Adsorption onto Almond Shell (Prunus Dulcis)

Department of Environmental Engineering, Engineering Faculty, Cumhuriyet University, Kayseri Str., 58140, Sivas,

Ecological Chemistry and Engineering S

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

In the work, adsorption of Cu2+ ions onto almond shell were investigated under different operational conditions. Almond shell was used without any pretreatment...

Kinetic and Isotherm Analysis of Cu(II) Adsorption onto Almond Shell (Prunus Dulcis)

Data publikacji: 12 kwi 2017

Zakres stron: 87 - 106

DOI: https://doi.org/10.1515/eces-2017-0007

Słowa kluczowe
adsorption, kinetics, isotherm study, almond shell, characterization sorbent

© by Sayiter Yildiz

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Kinetic and Isotherm Analysis of Cu(II) Adsorption onto Almond Shell (Prunus Dulcis)

Data publikacji: 12 kwi 2017

Zakres stron: 87 - 106

DOI: https://doi.org/10.1515/eces-2017-0007

Słowa kluczoweadsorption, kinetics, isotherm study, almond shell, characterization sorbent

© by Sayiter Yildiz

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
adsorption, kinetics, isotherm study, almond shell, characterization sorbent