This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.
American Association of State Highway and Transportation Officials. (2012). AASHTO LRFD Bridge Design Specifications. Washington DC.American Association of State Highway and Transportation Officials2012Washington DCSearch in Google Scholar
American Association of State Highway and Transportation Officials. (2016). AASHTO LRFD Bridge Design Specifications. Washington DC.American Association of State Highway and Transportation Officials2016Washington DCSearch in Google Scholar
Bakhoum, M.M., Mourad, S.A. & Hassan, M.M. (2016). Comparison of actions and resistances in different building design codes. J. Adv. Res. 7(5), 757–767. 10.1016/j.jare.2015.11.001.BakhoumM.M.MouradS.A.HassanM.M.2016Comparison of actions and resistances in different building design codes7575776710.1016/j.jare.2015.11.001Open DOISearch in Google Scholar
British Standards Institution. (2000). British standard: Execution of special geotechnical works - Diaphragm walls. BS EN 1538:2000. London.British Standards Institution2000BS EN 1538:2000LondonSearch in Google Scholar
British Standards Institution. (2004). UK National Annex to Eurocode 7 Geotechnical design, General rules. BS NA EN 1997-1:2004. London.British Standards Institution2004BS NA EN 19971:2004LondonSearch in Google Scholar
British Standards Institution. (2015). British standard: Code of practice for earth retaining structures. BS 8002:2015. London.British Standards Institution2015BS 8002:2015LondonSearch in Google Scholar
British Standards Institution. (2015). British standard: Code of practice for foundations. BS 8004:2015. London.British Standards Institution2015BS 8004:2015LondonSearch in Google Scholar
Brown, D., Wulleman, T. & Bottiau, M. (2016). A comparison of design practice of bored piles/drilled shafts between Europe and North America. The Journal of the Deep Foundations Institute. 10(2), 54-63. 10.1080/19375247.2016.1254375BrownD.WullemanT.BottiauM.2016A comparison of design practice of bored piles/drilled shafts between Europe and North America102546310.1080/19375247.2016.1254375Open DOISearch in Google Scholar
Bureau of Indian Standards. (1980). Indian standard: Code of practice for design and construction of diaphragm walls. IS 9556:1980(R2003). New Delhi.Bureau of Indian Standards1980IS 9556:1980(R2003)New DelhiSearch in Google Scholar
Bureau of Indian Standards. (1989). Indian standard: Code of practice for planning and design of ports and harbours-Part 2 Earth Pressures. IS 4651 (Part 2):1989. New Delhi.Bureau of Indian Standards1989IS 4651 (Part 2):1989New DelhiSearch in Google Scholar
Bureau of Indian Standards. (2014). Indian standard: Code of practice for planning and design of ports and harbours-General design considerations. IS 4651 (Part 4). New Delhi.Bureau of Indian Standards2014IS 4651 (Part 4)New DelhiSearch in Google Scholar
Canadian Geotechnical Society. (2006). Canadian Foundation Engineering Manual. 4th edition. Canada.Canadian Geotechnical Society20064thCanadaSearch in Google Scholar
Canadian Standards Association. (2006). Canadian Highway Bridge Design Code. CAN/CSA-S6-06. Ontario.Canadian Standards Association2006CAN/CSA-S6-06OntarioSearch in Google Scholar
Canadian Standards Association. (2014). Canadian Highway Bridge Design Code. CAN/CSA-S6-14. Ontario.Canadian Standards Association2014CAN/CSA-S6-14OntarioSearch in Google Scholar
European committee for standardization. (2004). European standard: Eurocode7 Geotechnical Design Part 1: General rules. EN 1997-1:2004. Brussels.European committee for standardization2004EN 1997-1:2004BrusselsSearch in Google Scholar
European committee for standardization. (2004). European standard: Eurocode7 Geotechnical Design Part 2: Ground investigation and testing. EN 1997-2:2004. Brussels.European committee for standardization2004EN 1997-2:2004BrusselsSearch in Google Scholar
Fellenius, B.H. (2014). Piled foundation design as reflected in codes and standards. Proceedings of the DFI-EFFC International Conference on Piling and Deep Foundations, 21-23 May 2014 ( pp 1013-1030). Stockholm.FelleniusB.H.2014Piled foundation design as reflected in codes and standards21-23 May201410131030StockholmSearch in Google Scholar
Fenton, G.A., Naghibi, F., Dundas, D., Bathurst, R.J.& Griffiths, D.V. (2016) Reliability-Based Geotechnical Design in the 2014 Canadian Highway Bridge Design Code. Can. Geotech. J. 53(2), 236-251. 10.1139/cgj-2015-0158.FentonG.A.NaghibiF.DundasD.BathurstR.J.GriffithsD.V.2016Reliability-Based Geotechnical Design in the 2014 Canadian Highway Bridge Design Code53223625110.1139/cgj-2015-0158Open DOISearch in Google Scholar
Khabbaz, H. & Aung, Y. (2015). Anchored wall design: comparing the global and partial factors of safety incorporating the Australian standards. International Journal of Geomate 9(1), 1395-1402. 10.21660/2015.17.4291.KhabbazH.AungY.2015Anchored wall design: comparing the global and partial factors of safety incorporating the Australian standards911395140210.21660/2015.17.4291Open DOISearch in Google Scholar
Lewandowska, A.S. & Czajewska, M.M. (2007). Design of diaphragm walls according to EN 1997-1:2004 Eurocode 7. Proceedings of the 14th European Conference on Soil Mechanics and Geotechnical Engineering, 2007 (pp_291-296). Madrid: IOS Press.LewandowskaA.S.CzajewskaM.M.2007Design of diaphragm walls according to EN 1997-1:2004 Eurocode 72007291296MadridIOS PressSearch in Google Scholar
Simpson, B. (2000). Partial factors: where to apply them? International Workshop on Limit State Design in Geotechnical Engineering, 18 November 2000. Melbourne.SimpsonB.2000Partial factors: where to apply them?18 November2000MelbourneSearch in Google Scholar
Standards Australia. (2002). Australian standard: Earth Retaining Structures. AS 4678-2002. Sydney.Standards Australia2002AS 4678-2002SydneySearch in Google Scholar
Standards Australia. (2002). Structural design actions-permanent, imposed and other actions. AS/NZS 1170-1-2002. Sydney.Standards Australia2002AS/NZS 1170-1-2002SydneySearch in Google Scholar
Standards Australia. (2004). Australian standard: Bridge design Part 3 Foundations and soil-supporting structures. AS 5100-3-2004. Sydney.Standards Australia2004AS 5100-3-2004SydneySearch in Google Scholar
Tabsh, S.W. (2013). Comparison between reinforced concrete designs based on the ACI 318 and BS 8110 codes. Structural Engineering & Mechanics. 48(4), 467-477. 10.12989/sem.2013.48.4.467.TabshS.W.2013Comparison between reinforced concrete designs based on the ACI 318 and BS 8110 codes48446747710.12989/sem.2013.48.4.467Open DOISearch in Google Scholar
Wijaya, J. & Taiebat, H. (2009). Factor of safety in AS-4678: Earth retaining structures. Australian Geomechanics Journal. 44 (4), 27-31.WijayaJ.TaiebatH.2009Factor of safety in AS-4678: Earth retaining structures4442731Search in Google Scholar