The article deals with a reduction of friction coefficient of bearing steel 100Cr6. Reduction of friction was achieved by means of a CarbonX DLC coating. The coating exhibited excellent friction and mechanical properties. This coating was applied to samples made of 100Cr6 bearing steel. The friction results of the CarbonX coating were compared to the friction results of the 100Cr6 bearing steel. Reducing the friction of 100Cr6 bearing steel resulted in reduced wear and increase lifetime. The friction process of the samples will take place in an environment without lubrication. The aim of the article is to verify the behaviour of the DLC coating without the presence of lubricant in the friction node. The achieved results are to be interpreted in the conclusion of article.
Falls das inline PDF nicht korrekt dargestellt ist, können Sie das PDF hier herunterladen.
Brezničan, M., Fabian, P., Meško, J., Drbúl, M., 2013. The simulation of influence of quenching temperature on properties of bearing rings. Manufacturing technology: journal for science, research and production, 13, 20-25.
Drabik, M., Truchly, M., Ballo, V., et al., 2018. Influence of substrate material and its plasma pretreatment on adhesion and properties of WC/a-C:H nanocomposite coatings deposited at low temperature, Surface and coatings technology, 333, 138-147.
Fabian, P., Meško, J., Nikolič, R., 2017. Simulation of quenching process of steels creating complex carbides, FME transactions, 45, 510-516.
Liščić, B., Tensi, H.M., Canale, L.C.F., Totten, G.E., 2010. Quenching theory and technology, 2nd ed., CRC Pres, Taylor and Francis Group, Boca Raton, New York, USA.
Pastorek, F., Borko, K., Fintová, S., Kajánek, D., Hadzima, B., 2016. Effect of surface pretreatment on quality and electrochemical corrosion properties of manganese phosphate on S355J2 HSLA steel. Coatings, 6 (4), 9.
Radek, N., Szczotok, A., Gadek-Moszczak, A., el al., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings, Archives of metallurgy and materials, 63, 809-816.
Tsui, L.-K., Garzon, F., 2017. CarbonXS GUI: A graphical front-end for CarbonXS. J. Appl. Crystallogr. 50, 1830-1833.
Vicen, M., Fabian, P., Bronček, J., Radek, N., 2019. Effect of PVD coating on change properties of 100Cr6 bearing steel, Slovak Journal of Technolog, 11, 63-66.
Ulewicz, R., Mazur, M., 2013. Fatigue testing structural steel as a factor of safety of technical facilities maintenance. Production Engineering Archives, 1(1), 32-34.