TS-BTPhen as a promising hydrophilic complexing agent for selective Am(III) separation by solvent extraction

The novel hydrophilic back-extraction agent TS-BTPhen (3,3ʹ,3ʺ,3ʹʺ-[3-(1,10-phenanthroline-2,9-diyl)-1,2,4-triazine-5,5,6,6-tetrayl]tetrabenzenesulfonic acid) was tested for its selectivity towards Am(III) over Cm(III) and Eu(III) with a TODGA (N,N,Nʹ,Nʹ-tetraoctyldiglycolamide) based solvent. Batch experiments were carried out using TS-BTPhen dissolved in aqueous nitric acid solution with tracers of ¹⁵²Eu, ²⁴¹Am and ²⁴⁴Cm. A significant increase of the separation factor for Cm over Am from SF_Cm/Am = 1.6 up to SF_Cm/Am = 3.3 was observed compared to the use of a TODGA-nitric acid system alone. Furthermore, stripping was possible at high nitric acid concentrations (0.6-0.7 mol/L) resulting in a low sensitivity to acidity changes. The influence of the TS-BTPhen concentration was analyzed. A slope of -2 was expected taking into account literature stoichiometries of the lipophilic analogue CyMe₄BTPhen. However, a slope of -1 was found. Batch stripping kinetics showed fast kinetics for the trivalent actinides. As an alternative organic ligand the methylated TODGA derivate Me-TODGA (2-methyl-N,N,Nʹ,Nʹ-tetraoctyldiglycolamide) was tested in combination with the hydrophilic TS-BTPhen. The Am(III) separation was achieved at even higher nitric acid concentrations compared to TODGA.