Evaluation of the Influence of a Rail Vehicle Running with Wheel-flat on the Railway Track

Open access


The railway transport network is currently in a quite big expansion. Therefore, railway tracks are modernized and the attention is given also on the technical state of rail vehicles, which operate on them. However, it may happen that the wheel surface is damaged. One of the most common reasons of wheel damage is too much braking, which results to the wheel-flat formation. This article is focused on the evaluation of the influence of a rail vehicle running on the railway track, which a wheel is damaged by the wheel-flat. Investigation of these negative effects was performed by means of simulation computations. As evaluating parameters, values of the wheel force in the contact of the rail and wheel with a flat where observed.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Mašek J. Kendra M. Milinkovič S. Veskovič S. & Barta D. (2015). Proposal and application of methodology of revitalisation of regional railway track in Slovakia and Serbia. Part 1: Theoretical approach and proposal of methodology for revitalisation of regional railways. Transport Problems 2015 85-95.

  • [2] Grenčík J. Poprocký R. Galliková J. & Volna P. (2018). Use of risk assessment methods in maintenance for more reliable rolling stock operation. MATEC Web of Conferences 157 DOI: 10.1051/matecconf/201815704002.

  • [3] Melnik R. & Sowinski B. (2013). Application of the rail vehicle’s monitoring system in the process of suspension condition assessment. Komunikacie 15(4) 3-8.

  • [4] Chudzikiewicz A. Bogacz R. & Kostrzewski M. (2014). Using acceleration signals recorded on a railway vehicle wheelsets for rail track condition monitoring. In 7th European Workshop on Structural Health Monitoring: EWSHM 2014 - 2nd European Conference of the Prognostics and Health Management (PHM) Society2014 8-11 July 2014 (167-174). Nantes France.

  • [5] Suchánek A. Harušinec J. Loulová M. & Strážovec P. (2018). Analysis of the distribution of temperature fields in the braked railway wheel. MATEC Web of Conference 157. DOI: 10.1015/2fmatecconf/2f2018.15702048.

  • [6] Ližbetin J. Vejs P. Stopka O. & Cempírek V. (2016). The significance of dynamic detection of the railway vehicles weight. Nase More 63(3) 156-160.

  • [7] Gerlici J. Lack T. & Harusinec J. (2014). Realistic simulation of railway operation on the RAILBCOT test stand. Applied Mechanics and Materials 486 387-395. DOI: 10.4028/www.scientific.net/AMM.486.387.

  • [8] Nangolo N.F. & Klimenda F. (2014). System identification for underdamped mechanical systems. In EAN 2014: 52nd International Conference on Experimental Stress Analysis 2-5 June 2014 Marianske Lazne Czech Republic.

  • [9] Hren I. Hejma P. Michna S. Svoboda M. & Soukup J. (2018). Analysis of torque cam mechanism. MATEC Web of Conference 157 DOI: 10.1051/matecconf/201815706004.

  • [10] Šťastniak P. Smetanka L. & Moravčík M. (2017). Development of modern railway bogie for broad track gauge - bogie frame assessment. Manufacturing Technology 17(2) 250-256.

  • [11] Hauser V. Nozhenko O. Kravchenko K. Loulova M. Gerlici J. & Lack T. (2017). Impact of three boxes bogie to tram behaviour when passing curved track. Procedia Engineering 192 295-300. DOI: 10.1016/j.proeng.2017.06.051.

  • [12] Kostrzewski M. & Melnik R. (2017). Numerical dynamics study of a rail vehicle with differential gears. Procedia Engineering 192 439-444. DOI: 10.1016/j.proeng.2017.06.076.

  • [13] Bogdevičius M. & Žygiene R. (2017). Research of System Vehicle-track when Wheel is Scaled. Procedia Engineering 187 599-603. DOI: 10.1016/2fj.proeng.2017.04.419.

  • [14] Brizuela J. Fritsch C. & Ibanez A. (2011). Railway wheel-flat detection and measurement by ultrasound. Transportation Research Part C 19 978-984. DOI: 10.1016/j.trc.2011.04.004.

  • [15] Lack T. & Gerlici J. (2014). A modified strip method to speed up the calculation of normal stress between wheel and rail. Applied Mechanics and Materials 486 359-370. DOI: 10.4028/2fwww.scientific.net/2fAMM.486.359.

  • [16] Lack T. & Gerlici J. (2015): The FASTSIM method modification to speed up the calculation of tangencial contact stressess between wheel and rail. Manufacturing Technology 13(4) 486-492.

  • [17] Mazilu T. (2007). A dynamic model for the impact between the wheel flat and rail. UPB Scientific Bulletin Series D: Mechanical Engineering 69(2) 45-58.

  • [18] Bogdevičius M. Žygiene R. Dailydka S. Bartulis V. Skrickij V. & Pukalskas S. (2015). The dynamic behaviour of a wheel flat of a railway vehicle and rail irregularities. Transport 30(2) 217-232. DOI: 10.3846/2f16484142.2015.1051108.

  • [19] UIC CODE 518. (2009). Testing and approval of railway vehicles from the point of view of their dynamic behaviour - Safety - Track fatigue - Running behaviour. September 2009. Paris France.

  • [20] Pawelczyk M. Piotr L. & Podsiadlo R. (2015). Simulation study of the 4-axle wagon damaging impact on the track caused by some deformations of the wheel. In Current Problems in Rail Vehicles - PRORAIL 2015: 22nd International Conference 16-18 September 2015 (115-124) Žilina Slovakia.

  • [21] Steenbergen M.J.M.M. (2008). Wheel-rail interaction at short-wave irregularities. Delft: Wöhrmann Print Service Zutphen.

Journal information
Cited By
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 408 209 15
PDF Downloads 323 138 12