<abstract xmlns="http://www.w3.org/1999/xhtml">

This paper aims to provide a comprehensive overview of the field of ergonomics, with a specific focus on the application of virtual simulation in the context of manual assembly stations assisted by collaborative robots. The theoretical part of this paper presents a concise introduction to the origins and key figures in the field of ergonomics, highlighting the importance and relevance of this discipline. It also discusses the current methods of ergonomic evaluation and the necessary steps involved in conducting such assessments. Furthermore, it delves into the existing standards, associations, and organizations related to ergonomics, as well as the software solutions available for ergonomic analysis. A case study is presented which demonstrates how to perform an ergonomic analysis using the Ergonomics Evaluation module within the 3D Experience platform. The methodology follows a systematic approach, starting with a physical environment simulation to identify key positions for virtual evaluation. These positions are then simulated using a representative 3D model of the assembly station and selected manikins. The chosen ergonomic analysis method is tailored to the specific movements involved in the assembly activity.
</abstract>

Faculty of Engineering, Department of Industrial Engineering and Management

Optimizing Manual Assembly Operations: Ergonomics Analysis and Human-Robot Collaboration

<abstract xmlns="http://www.w3.org/1999/xhtml">

The curriculum of technical bachelor programs often focuses on various theories in order to emphase understanding but there is also an actual need to provide the students with specific technical skills. This paper presents an effective means to evaluate the students’ capability to measure geometrical product specifications namely the procedure of Repeatability and Reproducibility by variables. The measurement results were processed using MINITAB statistical software with its module called Gage R&amp;R Study. The conclusion was that the analyzed measurement system is excellent.
</abstract>

Evaluation of Students’ Measuring Capability in the Dimensional Control Laboratory Using R&amp;R Procedure by Variables

<abstract xmlns="http://www.w3.org/1999/xhtml">

This paper delves into the factors and ramifications of critical thinking among engineering students in Romania. Critical thinking, defined as the ability to analyze and evaluate information logically and creatively, is a key focus. The study seeks to address several research questions, including the nature of critical thinking as an innate gift or learned skill, variations in critical thinking by gender, year of studies, education, and life satisfaction, and the relationship between critical thinking and human logic. Furthermore, the study explores the influence of formal education in Romania on the development of critical thinking.
</abstract>

Investigating Critical Thinking Among Engineering Students in Romania

<abstract xmlns="http://www.w3.org/1999/xhtml">

This article explores the process of calibrating the properties of DC01 materials for finite element analysis using ABAQUS and Isight. Precise calibration of yield strength and tensile strength is crucial for accurately modeling material behavior under various loading conditions. The article details the sample preparation process, deformation measurements, and tensile tests to obtain experimental data. These data are then used to calibrate the DC01 material model in ABAQUS with the assistance of Isight, ensuring that the simulations accurately reflect real-world behavior. The results indicate the success of the calibration, facilitating the design and testing of products in a predictive virtual environment. Precise calibration is essential for predicting material behavior in real-world conditions and minimizing the risk of implementation failures.
</abstract>

Faculty of Engineering, Department of Industrial Machines and Equipment

Calibrating DC01 Material Properties for Finite Element Analysis with Abaqus and Isight

<abstract xmlns="http://www.w3.org/1999/xhtml">

The paper’s aim is to describe the stages of the experimental research as well as the processing of data measured in the SPIF of some polymeric materials using methods such as the Taguchi method, ANOVA analysis, and establishing the regression equation to determine the relevant factors of influence.
</abstract>

Spif on Polymers – Experimental Data Design and Processing

AHEAD OF PRINT

Volume 75 (2023): Issue 1 (December 2023)

Volume 74 (2022): Issue 1 (December 2022)

Volume 73 (2021): Issue 1 (December 2021)

Volume 72 (2020): Issue 1 (December 2020)

Volume 71 (2019): Issue 1 (December 2019)

Volume 70 (2018): Issue 1 (December 2018)

Volume 69 (2017): Issue 1 (December 2017)

Volume 68 (2016): Issue 1 (December 2016)

Volume 67 (2015): Issue 1 (September 2015)

Volume 66 (2015): Issue 1 (July 2015)

Volume 65 (2014): Issue 1 (December 2014)

Volume 64 (2014): Issue 1 (November 2014)

Acta Universitatis Cibiniensis. Technical Series

 Publishing House and Owner: Lucian Blaga University of Sibiu, Romania  Acta Universitatis Cibiniensis - Technical Series provides an excellent support for the dissemination of the scientific research results conducted by professors, PhD students and other researchers.  Acta Universitatis Cibiniensis was first published in 1997. It first started as a scientific bulletin written in Romanian language and since 1998 submitted papers have been accepted other languages: English, French or German.  Since 2003, after reassessment by CNCSIS, Acta Universitatis Cibiniensis appears as Technical Series, ISSN 1583-7149, with an annual English volume.  In 2014 the first online volume was published by the academic publisher De Gruyter with the ISSN 2668-6449. Since than, Acta Universitatis Cibiniensis Technical Series volumes are available online and a new volume is added annually.  The main subjects covered by the scientific bulletin during its publishing history were:   Advanced Manufacturing Technologies  Mechanical Engineering, Mechatronics and Robotics  Computer Science and Automation  Materials Science and Technology  Academic Education and Management   Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 

Acta Universitatis Cibiniensis. Technical Series

Volume 75 (2023): Issue 1 (December 2023)

Optimizing Manual Assembly Operations: Ergonomics Analysis and Human-Robot Collaboration

Evaluation of Students’ Measuring Capability in the Dimensional Control Laboratory Using R&R Procedure by Variables

Investigating Critical Thinking Among Engineering Students in Romania

Calibrating DC01 Material Properties for Finite Element Analysis with Abaqus and Isight

Spif on Polymers – Experimental Data Design and Processing

Wyszukiwanie

Wszystkie tomy i zeszyty w tym czasopiśmie