<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml">This work is focused on polyelectrolyte enhanced ultrafiltration as an effective heavy metal separation technique. Three types of effluents, containing Zn(II), Cu(II) and Ni(II) ions, were subjected to the separation process. Poly(sodium 4-styrenesulfonate) - PSSS, a water soluble anionic polyelectrolyte was used as a metal binding agent. Two Sepa® CF (Osmonics) membranes: EW, made of polysulfone and a modified polyacrylonitrile membrane MW, were used in the ultrafiltration process. The preliminary UF tests were carried out on model solutions with target metal ion concentrations of 10, 100 and 250 mg dm-3. The main parameters affecting the metal retention (the polyelectrolyte quantity and solution pH) were examined. The values of pH 6 and polymer : metal concentration ratio CPSSS : CM = 7.5 : 1 (mol of mer unit per mol of metal) were selected to perform the galvanic wastewater ultrafiltration-concentration tests. Three types of wastewater containing Zn(II), Ni(II) and Cu(II) ions within the concentration range of 30÷70 mg dm-3 were used in the investigations. Very high metal retention coefficients, up to > 99%, were achieved. The retentates obtained were subjected to the decomplexation-ultrafiltration (pH = 1) and subsequent diafiltration step, which enabled partial recovery of concentrated metal ions and the polyelectrolyte. The recovered polyelectrolyte was reused toward Ni(II) ions and the high effectiveness of metal separation has been achieved.</abstract>

This work is focused on polyelectrolyte enhanced ultrafiltration as an effective heavy metal separation technique. Three types of effluents, containing Zn(II), Cu(II) and Ni(II) ions, were subjected to the separation process. Poly(sodium 4-styrenesulfonate) - PSSS, a water soluble anionic polyelectrolyte was used as a metal binding agent. Two Sepa® CF (Osmonics) membranes: EW, made of polysulfone and a modified polyacrylonitrile membrane MW, were used in the ultrafiltration process. The preliminary UF tests were carried out on model solutions with target metal ion concentrations of 10, 100 and 250 mg dm-3. The main parameters affecting the metal retention (the polyelectrolyte quantity and solution pH) were examined. The values of pH 6 and polymer : metal concentration ratio CPSSS : CM = 7.5 : 1 (mol of mer unit per mol of metal) were selected to perform the galvanic wastewater ultrafiltration-concentration tests. Three types of wastewater containing Zn(II), Ni(II) and Cu(II) ions within the concentration range of 30÷70 mg dm-3 were used in the investigations. Very high metal retention coefficients, up to > 99%, were achieved. The retentates obtained were subjected to the decomplexation-ultrafiltration (pH = 1) and subsequent diafiltration step, which enabled partial recovery of concentrated metal ions and the polyelectrolyte. The recovered polyelectrolyte was reused toward Ni(II) ions and the high effectiveness of metal separation has been achieved.

Galvanic Wastewater Treatment by Means of Anionic Polymer Enhanced Ultrafiltration

Institute of Water and Wastewater Engineering, Silesian University of Technology, ul. Konarskiego 18, 44-100 Gliwice, Poland

Ecological Chemistry and Engineering S

This work is focused on polyelectrolyte enhanced ultrafiltration as an effective heavy metal separation technique. Three types of effluents, containing Zn(II),...

Galvanic Wastewater Treatment by Means of Anionic Polymer Enhanced Ultrafiltration

Data publikacji: 08 lis 2011

Zakres stron: 19 - 27

DOI: https://doi.org/10.2478/v10216-011-0002-2

Słowa kluczowe
ultrafiltracja wspomagana polimerem, metale ciężkie, ścieki galwaniczne, polielektrolit

This content is open access.

Galvanic Wastewater Treatment by Means of Anionic Polymer Enhanced Ultrafiltration

Data publikacji: 08 lis 2011

Zakres stron: 19 - 27

DOI: https://doi.org/10.2478/v10216-011-0002-2

Słowa kluczoweultrafiltracja wspomagana polimerem, metale ciężkie, ścieki galwaniczne, polielektrolit

This content is open access.

Słowa kluczowe
ultrafiltracja wspomagana polimerem, metale ciężkie, ścieki galwaniczne, polielektrolit