<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The selection of a composite material for any application will involve selection of reinforcing fibre and matrix, and their fractional volume in the resulting material. A properly selected combination will give a composite material high strength and stiffness, low weight, excellent fatigue and corrosion resistance. The present experimental work is a contribution to the study of the mechanical fatigue behaviour under 3-point bending stress, of aramid/aluminium composite panel with honeycomb core. The tests were performed on four specimens for three cyclic loadings (90%, 80% and 70%), and imposed deformation with a load ratio of 0.2 and a frequency of 5 Hz. The results show that the optimal load ensuring better service resistance of the experimented sandwich panel is 0.7 of the material elastic limit (720 N). Observation using optical microscope of fracture faces in static and cyclic flexion showed the different damage modes of skins and core.</p>
</abstract>

The selection of a composite material for any application will involve selection of reinforcing fibre and matrix, and their fractional volume in the resulting material. A properly selected combination will give a composite material high strength and stiffness, low weight, excellent fatigue and corrosion resistance. The present experimental work is a contribution to the study of the mechanical fatigue behaviour under 3-point bending stress, of aramid/aluminium composite panel with honeycomb core. The tests were performed on four specimens for three cyclic loadings (90%, 80% and 70%), and imposed deformation with a load ratio of 0.2 and a frequency of 5 Hz. The results show that the optimal load ensuring better service resistance of the experimented sandwich panel is 0.7 of the material elastic limit (720 N). Observation using optical microscope of fracture faces in static and cyclic flexion showed the different damage modes of skins and core.

Mechanical Fatigue Test of Aluminium Composite Panel (ACP) with Aramid Nida-Core Under Cyclic Bending

Laboratory of Industrial Mechanics, Faculty of Engineering Sciences

Department of Mechanical Engineering, Faculty of Engineering Sciences

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The selection of a composite material for any application will involve selection of reinforcing fibre and matrix, and their fractional volume in the resulting...

Mechanical Fatigue Test of Aluminium Composite Panel (ACP) with Aramid Nida-Core Under Cyclic Bending

Data publikacji: 12 gru 2020

Zakres stron: 1 - 10

DOI: https://doi.org/10.2478/scjme-2020-0015

Słowa kluczowe
Sandwich material, Aramid/aluminium, Nida-core, Tests, Bending, Fatigue, Fractography

© 2020 Ait Said Ahcene et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mechanical Fatigue Test of Aluminium Composite Panel (ACP) with Aramid Nida-Core Under Cyclic Bending

Data publikacji: 12 gru 2020

Zakres stron: 1 - 10

DOI: https://doi.org/10.2478/scjme-2020-0015

Słowa kluczoweSandwich material, Aramid/aluminium, Nida-core, Tests, Bending, Fatigue, Fractography

© 2020 Ait Said Ahcene et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
Sandwich material, Aramid/aluminium, Nida-core, Tests, Bending, Fatigue, Fractography