<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The Electrochemical discharge machining (ECDM) is a hybrid non-traditional process which is specifically used for machining of conducting as well as non-conducting materials. In this research work, the fabricated ECDM experimental setup was used to machine the Soda-lime glass material with Brass tool material. The experiments were done on Soda-lime glass material with the help of Taguchi L<sub>27</sub> orthogonal array method and analysed by using MINITAB 17 software. The average hole diameter and average machined depth results were checked after ECDM drilling on Soda-lime glass material with considering the input process parameters such as an electrolyte concentration, voltage and rotation. The experimental results indicated that voltage was the most dominant factor for average machined depth followed by an electrolyte concentration and rotation speed. The rotation speed was the most dominant factor for average hole diameter followed by voltage and electrolyte concentration.</p></abstract>

The Electrochemical discharge machining (ECDM) is a hybrid non-traditional process which is specifically used for machining of conducting as well as non-conducting materials. In this research work, the fabricated ECDM experimental setup was used to machine the Soda-lime glass material with Brass tool material. The experiments were done on Soda-lime glass material with the help of Taguchi L27 orthogonal array method and analysed by using MINITAB 17 software. The average hole diameter and average machined depth results were checked after ECDM drilling on Soda-lime glass material with considering the input process parameters such as an electrolyte concentration, voltage and rotation. The experimental results indicated that voltage was the most dominant factor for average machined depth followed by an electrolyte concentration and rotation speed. The rotation speed was the most dominant factor for average hole diameter followed by voltage and electrolyte concentration.

Parametric Analysis of Electrochemical Discharge Drilling on Soda-Lime Glass Material Using Taguchi L27 Orthogonal Array Method

Department of Production and Industrial Engineering, National Institute of Technology

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The Electrochemical discharge machining (ECDM) is a hybrid non-traditional process which is specifically used for machining of conducting as well as...

Parametric Analysis of Electrochemical Discharge Drilling on Soda-Lime Glass Material Using Taguchi L27 Orthogonal Array Method

Data publikacji: 05 gru 2019

Zakres stron: 115 - 132

DOI: https://doi.org/10.2478/scjme-2019-0047

Słowa kluczowe
ECDM, Soda-lime Glass, Taguchi, Brass, ANOVA

© 2019 Pravin Pawar et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parametric Analysis of Electrochemical Discharge Drilling on Soda-Lime Glass Material Using Taguchi L27 Orthogonal Array Method

Data publikacji: 05 gru 2019

Zakres stron: 115 - 132

DOI: https://doi.org/10.2478/scjme-2019-0047

Słowa kluczoweECDM, Soda-lime Glass, Taguchi, Brass, ANOVA

© 2019 Pravin Pawar et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
ECDM, Soda-lime Glass, Taguchi, Brass, ANOVA