<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Currently, various variants of physical and geometrical non-linear calculation of anisotropic bodies have been developed. In spite of the large and increasing number of studies on the theory of shells there are still many unsufficiently developed problems important both in scientific and applied fields, for example, development of practically convenient methods for calculating of anisotropic sealing composite materials weakened by eccentric holes under the influence of local loadings. Stress-deformed state of a packing ring with eccentric holes of sealing materials was studied. In composite materials, the Hooke<sup>’</sup>s equation was used for this purpose. Also, using Lurie’s symbolic method, the concrete solution of the sealing problem with eccentric holes was obtained.</p></abstract>

Currently, various variants of physical and geometrical non-linear calculation of anisotropic bodies have been developed. In spite of the large and increasing number of studies on the theory of shells there are still many unsufficiently developed problems important both in scientific and applied fields, for example, development of practically convenient methods for calculating of anisotropic sealing composite materials weakened by eccentric holes under the influence of local loadings. Stress-deformed state of a packing ring with eccentric holes of sealing materials was studied. In composite materials, the Hooke’s equation was used for this purpose. Also, using Lurie’s symbolic method, the concrete solution of the sealing problem with eccentric holes was obtained.

Stress-Deformed State of a Packing Ring with Eccentric Holes

Azerbaijan State Oil and Industry University

Proceedings of the Latvian Academy of Sciences. Section B. Natural, Exact, and Applied Sciences.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Stress-Deformed State of a Packing Ring with Eccentric Holes"}

Currently, various variants of physical and geometrical non-linear calculation of anisotropic bodies have been developed. In spite of the large and increasing...

Stress-Deformed State of a Packing Ring with Eccentric Holes

Data publikacji: 22 wrz 2020

Zakres stron: 287 - 292

Otrzymano: 23 lut 2019

Przyjęty: 06 lip 2020

DOI: https://doi.org/10.2478/prolas-2020-0044

Słowa kluczowe
eccentricity, packing ring, stress, deformation, method of initial function, stress tensor components, Lurie’s method, dimensionless geometric parameter

© 2020 Ilman Hasanov et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Stress-Deformed State of a Packing Ring with Eccentric Holes

Data publikacji: 22 wrz 2020

Zakres stron: 287 - 292

Otrzymano: 23 lut 2019

Przyjęty: 06 lip 2020

DOI: https://doi.org/10.2478/prolas-2020-0044

Słowa kluczoweeccentricity, packing ring, stress, deformation, method of initial function, stress tensor components, Lurie’s method, dimensionless geometric parameter

© 2020 Ilman Hasanov et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
eccentricity, packing ring, stress, deformation, method of initial function, stress tensor components, Lurie’s method, dimensionless geometric parameter