<abstract xmlns="http://www.w3.org/1999/xhtml"><p>An open channel flume with a central 180-degree bend with a rigid bed is designed to obtain a better understanding of the complex flow pattern around a T-shaped spur dike located in a sharp bend. The 3-dimensional velocities are measured by using an acoustic Doppler velocimetry under clear-water conditions. This study’s primary objective is to compare variations of the mean flow pattern along a 180-degree bend with a variety of T-shaped spur dike lengths. In order to do so, parameters such as streamlines, the maximum velocity distribution, and the secondary flow strength under the influence of three T-shaped spur dike lengths will be analyzed and then compared with the case where no spur dikes are implemented. The results show that with the spur dike placed at the bend apex, the mean secondary flow strength at that range increases by approximately 2.5 times. In addition, a 67% increase in the length of the wing and web of the spur dike leads to a 27% growth in the mean secondary flow strength along the bend.</p></abstract>

An open channel flume with a central 180-degree bend with a rigid bed is designed to obtain a better understanding of the complex flow pattern around a T-shaped spur dike located in a sharp bend. The 3-dimensional velocities are measured by using an acoustic Doppler velocimetry under clear-water conditions. This study’s primary objective is to compare variations of the mean flow pattern along a 180-degree bend with a variety of T-shaped spur dike lengths. In order to do so, parameters such as streamlines, the maximum velocity distribution, and the secondary flow strength under the influence of three T-shaped spur dike lengths will be analyzed and then compared with the case where no spur dikes are implemented. The results show that with the spur dike placed at the bend apex, the mean secondary flow strength at that range increases by approximately 2.5 times. In addition, a 67% increase in the length of the wing and web of the spur dike leads to a 27% growth in the mean secondary flow strength along the bend.

Effect of T-shaped spur dike length on mean flow characteristics along a 180-degree sharp bend

Department of Civil and Environmental Engineering

Journal of Hydrology and Hydromechanics

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

An open channel flume with a central 180-degree bend with a rigid bed is designed to obtain a better understanding of the complex flow pattern around a...

Effect of T-shaped spur dike length on mean flow characteristics along a 180-degree sharp bend

Data publikacji: 26 sty 2021

Zakres stron: 98 - 107

Otrzymano: 14 maj 2020

Przyjęty: 11 lis 2020

DOI: https://doi.org/10.2478/johh-2020-0045

Słowa kluczowe
3-Dimensional velocity, Secondary flows, T-shaped spur dike, Acoustic Doppler velocimetry

© 2021 Maryam Akbari et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Effect of T-shaped spur dike length on mean flow characteristics along a 180-degree sharp bend

Data publikacji: 26 sty 2021

Zakres stron: 98 - 107

Otrzymano: 14 maj 2020

Przyjęty: 11 lis 2020

DOI: https://doi.org/10.2478/johh-2020-0045

Słowa kluczowe3-Dimensional velocity, Secondary flows, T-shaped spur dike, Acoustic Doppler velocimetry

© 2021 Maryam Akbari et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
3-Dimensional velocity, Secondary flows, T-shaped spur dike, Acoustic Doppler velocimetry