<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The use of various additives (admixtures) in concrete and cement products has been considered by various researchers in recent years. Microsilica (Silica fume) can also be considered as one of the most widely used additives (admixtures) in this section. In this study, 120 concrete specimens were constructed using a mix design based on ACI in the laboratory with an overview of records and advantages of using microsilica in concrete. The microsilica used in concrete specimens has been considered 2%, 5.5% and 7.5% by weight of cement. Finally impact permeability, tension and uniaxial compressive strength tests were done on concrete specimens and their mechanical properties were evaluated. The results show that microsilica improves the mechanical properties of concrete. The results also show that the use of microsilica in ordinary concrete has a very positive effect in controlling the surface cracks and increasing some strength parameters such as tensile and compressive strength of concrete.</p></abstract>

The use of various additives (admixtures) in concrete and cement products has been considered by various researchers in recent years. Microsilica (Silica fume) can also be considered as one of the most widely used additives (admixtures) in this section. In this study, 120 concrete specimens were constructed using a mix design based on ACI in the laboratory with an overview of records and advantages of using microsilica in concrete. The microsilica used in concrete specimens has been considered 2%, 5.5% and 7.5% by weight of cement. Finally impact permeability, tension and uniaxial compressive strength tests were done on concrete specimens and their mechanical properties were evaluated. The results show that microsilica improves the mechanical properties of concrete. The results also show that the use of microsilica in ordinary concrete has a very positive effect in controlling the surface cracks and increasing some strength parameters such as tensile and compressive strength of concrete.

Experimental Evaluation of the Effect of Silica Fume on Compressive, Tensile Strength, Abrasion Resistance, Slump and Impact Test and Water Permability Coefficient of Concrete

Department of Civil Engineering, Mahabad Branch

Journal of Applied Engineering Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The use of various additives (admixtures) in concrete and cement products has been considered by various researchers in recent years. Microsilica (Silica fume)...

Experimental Evaluation of the Effect of Silica Fume on Compressive, Tensile Strength, Abrasion Resistance, Slump and Impact Test and Water Permability Coefficient of Concrete

Data publikacji: 20 sie 2018

Zakres stron: 27 - 36

Otrzymano: 20 mar 2018

Przyjęty: 02 kwi 2018

DOI: https://doi.org/10.2478/jaes-2018-0004

Słowa kluczowe
Concrete, Microsilica, Mechanical properties, Slump

© 2018 M. Esmailpour et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Experimental Evaluation of the Effect of Silica Fume on Compressive, Tensile Strength, Abrasion Resistance, Slump and Impact Test and Water Permability Coefficient of Concrete

Data publikacji: 20 sie 2018

Zakres stron: 27 - 36

Otrzymano: 20 mar 2018

Przyjęty: 02 kwi 2018

DOI: https://doi.org/10.2478/jaes-2018-0004

Słowa kluczoweConcrete, Microsilica, Mechanical properties, Slump

© 2018 M. Esmailpour et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
Concrete, Microsilica, Mechanical properties, Slump