[
Abu-Tair, A., Rigden, S., Burley, E., 1996. Testing the Bond Between Repair Materials and Concrete Substrate. ACI Materials Journal, 93(6), 553-558
]Search in Google Scholar
[
Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2018. Research of RC Columns Strengthened by Carbon FRP Under Loading. Matec Web of Conferences, 174, 04017, DOI: 10.1051/matecconf/201817404017
]Search in Google Scholar
[
Bobalo, T., Blikharskyy, Y., Vashkevich, R., Volynets, M., 2018. Bearing capacity of RC beams reinforced with high strength rebars and steel plate. Matec Web of Conferences, 230, 02003, DOI: 10.1051/matecconf/201823002003
]Search in Google Scholar
[
Brózda, K., Selejdak, J., Koteš, P., 2017. The Analysis of Beam Reinforced with FRP Bars in Bending. Procedia Engineering, 192, 64-68, DOI: 10.1016/j.proeng.2017.06.011
]Search in Google Scholar
[
Cheng, Y., Hanif, A., Chen, E., Ma, G., Li, Z., 2018. Simulation of a Novel Capacitive Sensor for Rebar Corrosion Detection. Construction and Building Materials, 174, 613-624, DOI: 10.1016/j.conbuildmat.2018.04.133
]Search in Google Scholar
[
Dudek, A., Lisiecka, B., Ulewicz, R., 2017. The Effect of Alloying Method on the Structure and Properties of Sintered Stainless Steel. Archives of Metallurgy and Materials, 62(1), 281-287, DOI: 10.1515/amm-2017-0042
]Search in Google Scholar
[
Kos Ž., Gotal Dmitrović, L., Klimenko, E., 2017. Developing a Model of a Strain (Deformation) of a Damaged Reinforced Concrete Pillar in Relation to a Linear Load Capacity. Technical Journal, 11(4), 150-154, (https://hrcak.srce.hr/190990)
]Search in Google Scholar
[
Kotsovou,G.M., Cotsovos, D.M., 2018. Shear Failure Criterion for RC T-Beams. Engineering Structures, 160, 44-45, DOI: 10.1016/j.engstruct.2017.12.044
]Search in Google Scholar
[
Khmil, R., Tytarenko R., Blikharskyy, Y., Vegera, P., 2018. Development of the procedure for the estimation of reliability of reinforced concrete beams, strengthened by building up the stretched reinforcing bars under load. Eastern-European Journal of Enterprise Technologies, 5(7), (95), 32-42, DOI: 10.15587/1729-4061.2018.142750.
]Search in Google Scholar
[
Krainskyi, P., Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2018a. Experimental Study of the Strengthening Effect of Reinforced Concrete Columns Jacketed Under Service Load Level. Matec Web of Conferences, 183, 02008, DOI: 10.1051/matecconf/201818302008
]Search in Google Scholar
[
Krainskyi, P., Blikharskyy, Y., Khmil, R., Vegera, P., 2018b. Influence of loading level on the bearing capacity of RC columns strengthened by jacketing. Matec Web of Conferences, 230, 02013, DOI: 10.1051/matecconf/201823002013.
]Search in Google Scholar
[
Lipiński, T., 2017. Corrosion of S235JR Steel in NaCl Environment at 3 Degrees C. 26th International Conference on Metallurgy and Materials, Ostrava, Tanger, 660-665.
]Search in Google Scholar
[
Mazur, M., 2016. Assumptions Concept of Lean Processes in the Organization of the Work on Example the Production of Building Components. Production Engineering Archives, 13(4), 41-43, DOI: 10.30657/pea.2016.13.09
]Search in Google Scholar
[
Muchaidze, I., Pommerenke, D., Chen, G., 2011. Steel Reinforcement Corrosion Detection with Coaxial Cable Sensors. Proceedings of SPIE, 7981, 79811L, DOI: 10.1117/12.879770
]Search in Google Scholar
[
Pietraszek, J., Goroshko, A., 2014. The Heuristic Approach to the Selection of Experimental Design, Model and Valid Pre-Processing Transformation of DoE Outcome. Advanced Materials Research, 874, 145-149, DOI: 10.4028/www.scientific.net/AMR.874.145
]Search in Google Scholar
[
Pliszka, I., Radek, N., 2017. Corrosion Resistance of WC-Cu Coatings Produced by Electrospark Deposition. Procedia Engineering, 192, 707-712, DOI: 10.1016/j.proeng.2017.06.122
]Search in Google Scholar
[
Pradhan, B., & Bhattacharjee, B., 2011. Rebar Corrosion in Chloride Environment. Construction and Building Materials, 25(5), 2565-2575 DOI: 10.1016/j.conbuildmat.2010.11.099
]Search in Google Scholar
[
Selejdak, J., Khmil R., Blikharskyy, Z., 2018. The Influence of Simultaneous Action of the Aggressive Environment and Loading on Strength of RC Beams. Matec Web of Conference, 183, 02002, DOI: 10.1051/matecconf/201818302002
]Search in Google Scholar
[
Selejdak, J., Ulewicz, R., Ingaldi, M., 2014. The Evaluation of the Use of a Device for Producing Metal Elements Applied in Civil Engineering. 23rd International Conference on Metallurgy and Materials, Ostrava, Tanger, 1882-1888
]Search in Google Scholar
[
Sobol, K., Blikharskyy, Z., Petrovska, N., Terly’a, V., 2014. Analysis of Structure Formation Peculiarities during Hydration of Oil-Well Cement with Zeolitic Tuff and Metakaolin Additives. Chemistry & Chemical Technology 8(4), 461-465 DOI: 10.23939/chcht08.04.461
]Search in Google Scholar
[
Vegera, P., Vashkevych, R., Blikharskyy, Z., 2018. Fracture Toughness of RC Beams With Different Shear Span. Matec Web of Conferences, 174, 02021, DOI: 10.1051/matecconf/201817402021
]Search in Google Scholar
[
Yang, M., Zhou, J., Zhang, H., Liao, L., Zhao, R., 2018. Magnetic Memory Detection of Rebar Corrosion in Concrete. Journal of Building Materials, 21, 345-350. DOI: 10.3969/j.issn.1007-9629.2018.02.028
]Search in Google Scholar
[
Zhang, Q., Mol’kov, Y.V., Sobko, Y.M., Blikhars’kyi, Y.Z., Khmil, R.E., 2015. Specific Fracture Energy of Thermally Hardened Reinforcement. Materials Science, 50(6), 824-829
]Search in Google Scholar
