<abstract xmlns="http://www.w3.org/1999/xhtml"> Friction stir processing (FSP) is solid state novel technique developed to refine microstructure and to improve the mechanical properties and be used to fabricate the aluminium alloy matrix composites. An attempt is made to fabricate AA6061/TiB2 aluminium alloy composite (AMCs) and the influence of process parameters like rotational speed, transverse feed, axial load and percentage reinforcement on microstructure and mechanical properties were studied. The microstructural observations are carried out and revealed that the reinforcement particles (TiB2) were uniformly dispersed in the nugget zone. The Tensile strength and Hardness of composites were evaluated. It was observed that tensile strength, and hardness were increased with increased the rotational speed and percentage reinforcement of particles. The process parameters were optimized using Taguchi analysis (Single Variable) and Grey analysis (Multi Variable). The most influential parameter was rotational speed in single variable method and multi variable optimization method. The ANOVA also done to know the percentage contribution of each parameter.</abstract>

Friction stir processing (FSP) is solid state novel technique developed to refine microstructure and to improve the mechanical properties and be used to fabricate the aluminium alloy matrix composites. An attempt is made to fabricate AA6061/TiB2 aluminium alloy composite (AMCs) and the influence of process parameters like rotational speed, transverse feed, axial load and percentage reinforcement on microstructure and mechanical properties were studied. The microstructural observations are carried out and revealed that the reinforcement particles (TiB2) were uniformly dispersed in the nugget zone. The Tensile strength and Hardness of composites were evaluated. It was observed that tensile strength, and hardness were increased with increased the rotational speed and percentage reinforcement of particles. The process parameters were optimized using Taguchi analysis (Single Variable) and Grey analysis (Multi Variable). The most influential parameter was rotational speed in single variable method and multi variable optimization method. The ANOVA also done to know the percentage contribution of each parameter.

Process Parameters Optimization for Producing AA6061/TiB2 Composites by Friction Stir Processing

BVC Engineering college, Faculty of Mechanical Engineering, Odalarevu -533210, Andhra Pradesh,

Andhra university college of Engineering (A), Faculty of Mechanical Engineering, Andhra University, Visakhapatnam- 530003, Andhra Pradesh,

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Process Parameters Optimization for Producing AA6061/TiB Composites by Friction Stir Processing

Friction stir processing (FSP) is solid state novel technique developed to refine microstructure and to improve the mechanical properties and be used to...

Process Parameters Optimization for Producing AA6061/TiB₂ Composites by Friction Stir Processing

Data publikacji: 03 maj 2017

Zakres stron: 101 - 118

DOI: https://doi.org/10.1515/scjme-2017-0011

Słowa kluczowe
Friction stir processing, Titanium Di boride, Tensile strength, Hardness, Metal Matrix Composite, Taguchi and Grey Analysis

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Process Parameters Optimization for Producing AA6061/TiB2 Composites by Friction Stir Processing

Data publikacji: 03 maj 2017

Zakres stron: 101 - 118

DOI: https://doi.org/10.1515/scjme-2017-0011

Słowa kluczoweFriction stir processing, Titanium Di boride, Tensile strength, Hardness, Metal Matrix Composite, Taguchi and Grey Analysis

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Process Parameters Optimization for Producing AA6061/TiB₂ Composites by Friction Stir Processing

Słowa kluczowe
Friction stir processing, Titanium Di boride, Tensile strength, Hardness, Metal Matrix Composite, Taguchi and Grey Analysis