<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The results of technological investigations in the scope of inkjet-printed flexible RFID antennas dedicated to UHF transponders and also problems with the application of nanomaterials are reported in this paper. The design of the antenna electrical circuit and the parameters of the inkjet printing process were elaborated on the basis of the numerical model prepared in the Mentor Graphics HyperLynx 3D EM software. The project evaluation was performed by measuring electrical parameters of the structures printed with silver-based conductive inks. The obtained results confirm coincidence between the model and its implementation in the inkjet printing technology. Finally, the prepared antenna has been applied in an RFID transponder of UHF band and the functional tests are also reported in this paper.</p></abstract>

The results of technological investigations in the scope of inkjet-printed flexible RFID antennas dedicated to UHF transponders and also problems with the application of nanomaterials are reported in this paper. The design of the antenna electrical circuit and the parameters of the inkjet printing process were elaborated on the basis of the numerical model prepared in the Mentor Graphics HyperLynx 3D EM software. The project evaluation was performed by measuring electrical parameters of the structures printed with silver-based conductive inks. The obtained results confirm coincidence between the model and its implementation in the inkjet printing technology. Finally, the prepared antenna has been applied in an RFID transponder of UHF band and the functional tests are also reported in this paper.

Inkjet-printed flexible RFID antenna for UHF RFID transponders

Rzeszow University of Technology, Dept. of Electronic and Communications Systems, al. Powstańców Warszawy 12, 35-959 Rzeszów,

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Inkjet-printed flexible RFID antenna for UHF RFID transponders"}

The results of technological investigations in the scope of inkjet-printed flexible RFID antennas dedicated to UHF transponders and also problems with the...

Inkjet-printed flexible RFID antenna for UHF RFID transponders

Data publikacji: 17 lis 2016

Zakres stron: 760 - 769

Otrzymano: 01 lut 2016

Przyjęty: 25 sie 2016

DOI: https://doi.org/10.1515/msp-2016-0097

Słowa kluczowe
flexible antenna, inkjet printing, RFID transponder, printed electronics

© Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Inkjet-printed flexible RFID antenna for UHF RFID transponders

Data publikacji: 17 lis 2016

Zakres stron: 760 - 769

Otrzymano: 01 lut 2016

Przyjęty: 25 sie 2016

DOI: https://doi.org/10.1515/msp-2016-0097

Słowa kluczoweflexible antenna, inkjet printing, RFID transponder, printed electronics

© Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
flexible antenna, inkjet printing, RFID transponder, printed electronics