<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml">The decomposition of mixtures of polystyrene, polyethylene, and motor oil was studied at 470 - 510°C in a flow-through setup supplied with a fluidized bed reactor and a cascade of receivers. The aim of the work was to determine the role of the fluidized bed in the reactor, in the process of degradation of plastics in the cases where it was only a carrier of heat for the endothermal process of pyrolysis or it was both a carrier of heat and a catalytic bed for the process. The effect of the catalyst granulation and of the method of the organization of work in the reactor on the yield of the process and on the composition of the products obtained, was also studied.In the cases where Al2 O3 of granulation 0.2 mm was used as a fluidized bed catalyst the liquid products of the decomposition of the polymers contained mainly alkyl-aromatic derivatives of styrene, benzene and alkane hydrocarbons. If nano-Al2 O3 was used as a catalyst and it was introduced into the reactor with a stream of raw materials, the obtained products were solids, composed mostly of styrene and alkene hydrocarbons.</abstract>

The decomposition of mixtures of polystyrene, polyethylene, and motor oil was studied at 470 - 510°C in a flow-through setup supplied with a fluidized bed reactor and a cascade of receivers. The aim of the work was to determine the role of the fluidized bed in the reactor, in the process of degradation of plastics in the cases where it was only a carrier of heat for the endothermal process of pyrolysis or it was both a carrier of heat and a catalytic bed for the process. The effect of the catalyst granulation and of the method of the organization of work in the reactor on the yield of the process and on the composition of the products obtained, was also studied.In the cases where Al2 O3 of granulation 0.2 mm was used as a fluidized bed catalyst the liquid products of the decomposition of the polymers contained mainly alkyl-aromatic derivatives of styrene, benzene and alkane hydrocarbons. If nano-Al2 O3 was used as a catalyst and it was introduced into the reactor with a stream of raw materials, the obtained products were solids, composed mostly of styrene and alkene hydrocarbons.

Fuel fractions obtained in the recycling of plastics

Faculty of Chemistry, Warsaw University of Technology, ul. Noakowskiego 3, 00-664 Warszawa, Poland

Polish Journal of Chemical Technology

{"article-title":"Fuel fractions obtained in the recycling of plastics"}

The decomposition of mixtures of polystyrene, polyethylene, and motor oil was studied at 470 - 510°C in a flow-through setup supplied with a fluidized bed...

Fuel fractions obtained in the recycling of plastics

Pubblicato online: 06 nov 2007

Pagine: 46 - 50

DOI: https://doi.org/10.2478/v10026-007-0052-5

Parole chiave
plastic recycling, catalytic cracking

This content is open access.

Fuel fractions obtained in the recycling of plastics

Pubblicato online: 06 nov 2007

Pagine: 46 - 50

DOI: https://doi.org/10.2478/v10026-007-0052-5

Parole chiaveplastic recycling, catalytic cracking

This content is open access.

Parole chiave
plastic recycling, catalytic cracking