[
[1] ANSYS Inc., “ANSYS FLUENT User’s Guide. Release 14.5”, 2013, available at: http://www.ansys.com
]Search in Google Scholar
[
[2] Capon, P. T., 1979, Cierva’s First Autogiros, Aeroplane Monthly, Vol. 7 No. 4, May 1979, pp. 234-240.
]Search in Google Scholar
[
[3] Cieślak S., 2011, Analiza możliwości zwiększenia prędkości przelotowej i zmniejszenia poziomu hałasu wiatrakowca (“Analysis of the possibility of increasing cruise speed and reduce autogiro’s noise”), Prace Instytutu Lotnictwa, Nr 219. s. 31-38. (in Polish)
]Search in Google Scholar
[
[4] Cieślak S., 2011, Analiza wpływu czynników konstrukcyjnych oraz parametrów sterowania na czas trwania i wysokość bezrozbiegowego startu wiatrakowca (”Analysis of the impact of design factors and control parameters on duration and height of autogiro’s jump start”),. Prace Instytutu Lotnictwa, Nr 219. s. 39-46. (in Polish)
]Search in Google Scholar
[
[5] Drela M., Youngren H., Scherrer M., and Deperrois A., 2012, “XFLR-5”, available at: http://www.xflr5.com/xflr5.htm
]Search in Google Scholar
[
[6] Floros M.W., Johnson W., Performance Analysis of the Slowed-Rotor Compound Helicopter Configuration, Journal of the American Helicopter Society. Presented at the AHS 4th Decennial Specialists’ Conference on Aeromechanics, San Francisco, California, 21th - 23th January, 2004.
]Search in Google Scholar
[
[7] Harwood P., Flying ‘New Generation’ Gyrocopter, A guide for converting pilots! http://www.gyrocopterschool.com/gyrocopter-autogyro-gyroplane/how-to-fly-gyros/
]Search in Google Scholar
[
[8] http://airfoiltools.com/airfoil/details?airfoil=n8h12-il
]Search in Google Scholar
[
[9] http://wirnikautorotacyjny.pl/, website of the project “Modern Gyroplane Main Rotor”, (UDA-POIG.01.03.01-14-007/12), co-financed by the European Regional Development Fund under the Operational Programme Innovative Economy 2007-2013.
]Search in Google Scholar
[
[10] Nocedal J. and Wright S.J., 2006, Numerical Optimization, Springer-Verlag, 2nd ed., Berlin - New York.
]Search in Google Scholar
[
[11] Pietrosiński, M., 2015, “Wpływ geometrii profilu lotniczego łopaty wirnika głównego na osiągi wiatrakowca” (Eng. : “The Influence of the Main Rotor Blade Airfoil Geometry on the Gyroplane Performance”), Transactions of the Institute of Aviation, 4 (241), s. 62-72.
]Search in Google Scholar
[
[12] Stalewski W., 2012, “Parametric Modelling of Aerodynamic Objects - the Key to Successful Design and Optimisation”, Aerotecnica Missili e Spazio. Italian Association of Aeronautics and Astronautics (AIDAA). 1/2 (90), March-June 2012.
]Search in Google Scholar
[
[13] Stalewski W. and Żółtak J. 2012, “Optimisation of the Helicopter Fuselage with Simulation of Main and Tail Rotor Influence”, in Proceedings of the 28th ICAS Congress of the International Council of the Aeronautical Sciences, ICAS, Brisbane, Australia, September 2012, ICAS, 1, pp. 256-266.
]Search in Google Scholar
[
[14] Stalewski W., Projektowanie i optymalizacja aerodynamiczna wiropłatów, (Eng.: Aerodynamic Design and Optimisation of Rotorcraft). Wydawnictwa Naukowe Instytutu Lotnictwa, 2017.
]Search in Google Scholar
[
[15] Stalewski W., 2013, “URANS Simulations of On or Near the Ground Flight of the Gyroplane”, in Proceedings of 39th European Rotorcraft Forum, ERF, Moscow, 3-6 September 2013, Russian Helicopters, pp. 55-57.
]Search in Google Scholar
[
[16] Stalewski W., Zalewski W., 2011, Analiza obliczeniowa własności aerodynamicznych wirnika nośnego wiatrakowca w stanie lotu ustalonego (autorotacji) (“Computational analysis of aerodynamic performance of gyroplane main rotor under cruise flight condition (autorotation)”), Prace Instytutu Lotnictwa, Nr 219. s. 269-279. (in Polish)
]Search in Google Scholar
[
[17] Stalewski W., Zalewski W., 2011, Analiza wybranych stanów lotu wiatrakowca w oparciu o obliczeniowe charakterystyki aerodynamiczne jego komponentów (“Analysis of selected states of gyroplane flight based on computational aerodynamic characteristics of its components”), Prace Instytutu Lotnictwa, Nr 219. s. 280-288. (in Polish)
]Search in Google Scholar
[
[18] Stalewski W., Zalewski W., 2011, Symulacja pracy wirnika nośnego wiatrakowca w początkowej fazie pionowego startu (“Computational simulation of operation of gyroplane main rotor in initial phase of vertical take-off”), Prace Instytutu Lotnictwa, Nr 219. s. 289-296. (in Polish)
]Search in Google Scholar
[
[19] Stalewski W., Żółtak J., 2012, Optimisation of the Helicopter Fuselage with Simulation of Main and Tail Rotor Influence, Proceedings of the 28th ICAS Congress of the International Council of the Aeronautical Sciences, ICAS, Brisbane, Australia, 23 - 28 September, 2012. ICAS 2012 CD-ROM Proceedings.
]Search in Google Scholar
[
[20] Stivers L.S., Rice F.J., 1946, Aerodynamic Characteristics of Four NACA Airfoil Sections Designed for Helicopter Rotor Blades. National Advisory for Aeronutics. NACA RB No. L5K02. http://naca.central.cranfield.ac.uk/reports/1946/naca-rb-l5k02.pdf
]Search in Google Scholar
[
[21] Szczepanik T., Dąbrowska J., 2009, Wiatrakowce, jako przewidywany kierunek rozwoju wiropłatów w XXI wieku (“Gyroplanes, as the predicted direction for the rotorcraft development in the 21st century”), Prace Instytutu Lotnictwa, Nr 201 (6/2009), s. 177-222. (in Polish)
]Search in Google Scholar
[
[22] Wikipedia: https://en.wikipedia.org/wiki/Autogyro
]Search in Google Scholar
