<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Fused deposition modelling (FDM) is one of the most effective rapid prototyping (RP) techniques due to its low cost, available materials and versatility. In FDM, a part of material (usually plastic) is made by heating this material to the molten state, and from the melt it is extruded through a nozzle and deposited on a surface. In the article, an alternative RP method is considered for improvement of the mechanical properties of a rapid prototype. The authors propose an analytical solution which allows for achievement of this purpose via advanced technologies. The base materials applied in RP technology can be combined with liquid resin which solidifies after a definite time. This makes it possible to create a channel through the prototype and fill it with another material having better mechanical properties. The optimal channel sizes can be chosen in order to raise the strength of material parts.</p></abstract>

Fused deposition modelling (FDM) is one of the most effective rapid prototyping (RP) techniques due to its low cost, available materials and versatility. In FDM, a part of material (usually plastic) is made by heating this material to the molten state, and from the melt it is extruded through a nozzle and deposited on a surface. In the article, an alternative RP method is considered for improvement of the mechanical properties of a rapid prototype. The authors propose an analytical solution which allows for achievement of this purpose via advanced technologies. The base materials applied in RP technology can be combined with liquid resin which solidifies after a definite time. This makes it possible to create a channel through the prototype and fill it with another material having better mechanical properties. The optimal channel sizes can be chosen in order to raise the strength of material parts.

Fused Deposition Modelling as Rapid Prototyping for Structural Material Improvement: Analytical Solution / Ātrās Prototipēšanas Ar Kausēšanas Metodi Strukturālā Uzlabojuma Analītisks Risinājums

Ventspils University College, 101a Inženieru Str., Ventspils, LV-3601, LATVIA

Latvian Journal of Physics and Technical Sciences

Fused deposition modelling (FDM) is one of the most effective rapid prototyping (RP) techniques due to its low cost, available materials and versatility. In...

Fused Deposition Modelling as Rapid Prototyping for Structural Material Improvement: Analytical Solution / Ātrās Prototipēšanas Ar Kausēšanas Metodi Strukturālā Uzlabojuma Analītisks Risinājums

Pubblicato online: 17 nov 2013

Pagine: 4 - 12

DOI: https://doi.org/10.2478/lpts-2013-0028

This content is open access.