Login
Registrati
Reimposta password
Pubblica & Distribuisci
Soluzioni Editoriali
Soluzioni di Distribuzione
Temi
Architettura e design
Arti
Business e Economia
Chimica
Chimica industriale
Farmacia
Filosofia
Fisica
Geoscienze
Ingegneria
Interesse generale
Legge
Letteratura
Linguistica e semiotica
Matematica
Medicina
Musica
Scienze bibliotecarie e dell'informazione, studi library
Scienze dei materiali
Scienze della vita
Scienze informatiche
Scienze sociali
Sport e tempo libero
Storia
Studi classici e del Vicino Oriente antico
Studi culturali
Studi ebraici
Teologia e religione
Pubblicazioni
Riviste
Libri
Atti
Editori
Blog
Contatti
Cerca
EUR
USD
GBP
Italiano
English
Deutsch
Polski
Español
Français
Italiano
Carrello
Home
Riviste
Journal of Electrical Bioimpedance
Volume 9 (2018): Numero 1 (January 2018)
Accesso libero
Use of a conical conducting layer with an electrical impedance probe to enhance sensitivity in epithelial tissues
Muhammad Abdul Kadir
Muhammad Abdul Kadir
e
K. Siddique-e Rabbani
K. Siddique-e Rabbani
| 31 dic 2018
Journal of Electrical Bioimpedance
Volume 9 (2018): Numero 1 (January 2018)
INFORMAZIONI SU QUESTO ARTICOLO
Articolo precedente
Articolo Successivo
Sommario
Articolo
Immagini e tabelle
Bibliografia
Autori
Articoli in questo Numero
Anteprima
PDF
Cita
CONDIVIDI
Pubblicato online:
31 dic 2018
Pagine:
176 - 183
Ricevuto:
18 dic 2018
DOI:
https://doi.org/10.2478/joeb-2018-0022
Parole chiave
Bioimpedance
,
Sensitivity
,
Epithelial tissue
,
virtual electrode
,
EIS
,
Impedance probe
,
conducting layer
© 2018 M.A. Kadir, K.S. Rabbani published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Fig.1
Schematic of current density vectors at point P for two pairs of electrodes AB and CD placed on the surface of a volume conductor.
Fig. 2
Schematic representation of the effect of an interposed conducting layer through imaginary current line patterns: a) for a 2D infinite layer, b) for a conical finite layer, giving rise to virtual electrodes with reduced separation.
Fig.3
FEM model of biological tissue for computation of impedance sensitivity. Four 1 mm dia cylindrical electrodes with edge to edge separation of 1 mm (centre to centre separation: 2 mm) are placed centrally on a surface of a cubic volume conductor with 50 mm sides. The green layer of thickness 300 μm represents an epithelial layer. A zoomed view of the electrodes is shown at the bottom.
Fig.4
Cylindrical conducting layer material placed in between the electrodes and the epithelial layer. The green layer of thickness 300 μm represents an epithelial layer.
Fig.5
Conical shaped conducting layer placed in between the electrodes and tissue surface.
Fig.6
Variation of plane average sensitivity along depth with different conducting layer (bolus) height for edge to edge electrode separation of 1mm. Depth zero indicates the surface of the volume conductor with or without the interposing conducting layer (probe).
Fig.7
Fractional impedance of the epithelial layer compared to the whole tissue as a function of the height of conducting layer. Edge-edge electrode separation is 1 mm.
Fig.8
Fractional contribution of the epithelial layer to the total transfer impedance against radii ratio of the conical conducting layer for different conducting layer height. Edge to edge electrode separation is 1 mm.
Fig.9
Fractional contribution of the epithelial layer to the total transfer impedance against radii ratio of the conical conducting layer for different conducting layer height. Edge to edge electrode separation 2mm.
Fig.10
Variation of fractional impedance of the epithelial layer with conical bolus radii ratio for different electrode separations (edge to edge) while the bolus height was constant at 1.2 mm.
Anteprima