<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The Ni-base superalloys are used in the aircraft industry for the production of aero engine most stressed parts, turbine blades or turbine discs. Quality of aero jet engine components has a significant influence on the overall lifetime of a jet engine as itself as well as the whole airplane. From this reason a dendrite arm spacing, grain size, morphology, number and value of <italic>γ′</italic>-phase are very important structural characteristics for blade or discs lifetime prediction. The methods of quantitative metallography are very often used for evaluation of structural characteristics mentioned above. The high-temperature effect on structural characteristics and application of quantitative methods evaluation are presented in this paper. The two different groups of Ni-base alloys have been used as experimental material: cast alloys ZhS6K and IN713LC, which are used for small turbine blades production and wrought alloys EI 698VD and EI 929, which are used for turbine disc production. Selected alloys have been evaluated in the starting stage and after applied heat-treatment at 850°C for 24 hrs. This applied heat-treatment causes structural changes in all alloys groups. In cast alloy dendritic structure is degraded and gamma prime average size has grown what has a negative influence on turbine blade creep rupture life. Wrought alloys show partially grain boundary melting and grain size changed due to recrystallization what causes mechanical properties decreasing – ultimate tensile strength mainly.</p></abstract>

The Ni-base superalloys are used in the aircraft industry for the production of aero engine most stressed parts, turbine blades or turbine discs. Quality of aero jet engine components has a significant influence on the overall lifetime of a jet engine as itself as well as the whole airplane. From this reason a dendrite arm spacing, grain size, morphology, number and value of γ′-phase are very important structural characteristics for blade or discs lifetime prediction. The methods of quantitative metallography are very often used for evaluation of structural characteristics mentioned above. The high-temperature effect on structural characteristics and application of quantitative methods evaluation are presented in this paper. The two different groups of Ni-base alloys have been used as experimental material: cast alloys ZhS6K and IN713LC, which are used for small turbine blades production and wrought alloys EI 698VD and EI 929, which are used for turbine disc production. Selected alloys have been evaluated in the starting stage and after applied heat-treatment at 850°C for 24 hrs. This applied heat-treatment causes structural changes in all alloys groups. In cast alloy dendritic structure is degraded and gamma prime average size has grown what has a negative influence on turbine blade creep rupture life. Wrought alloys show partially grain boundary melting and grain size changed due to recrystallization what causes mechanical properties decreasing – ultimate tensile strength mainly.

The Quality Assurance of Cast and Wrought Aero Jet Engine Components Made from Ni-base Superalloys with Using of Quantitative Metallography Methods and Alloys Lifetime Prediction

Conference Quality Production Improvement – CQPI

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Ni-base superalloys are used in the aircraft industry for the production of aero engine most stressed parts, turbine blades or turbine discs. Quality of...

The Quality Assurance of Cast and Wrought Aero Jet Engine Components Made from Ni-base Superalloys with Using of Quantitative Metallography Methods and Alloys Lifetime Prediction

Pubblicato online: 08 ott 2019

Pagine: 222 - 229

Ricevuto: 01 mar 2019

Accettato: 05 mag 2019

DOI: https://doi.org/10.2478/cqpi-2019-0030

Parole chiave
quality assurance, cast and wrought Ni-base superalloys, turbine blades, turbine discs, quantitative metallography

© 2019 Juraj Belan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Quality Assurance of Cast and Wrought Aero Jet Engine Components Made from Ni-base Superalloys with Using of Quantitative Metallography Methods and Alloys Lifetime Prediction

Pubblicato online: 08 ott 2019

Pagine: 222 - 229

Ricevuto: 01 mar 2019

Accettato: 05 mag 2019

DOI: https://doi.org/10.2478/cqpi-2019-0030

Parole chiavequality assurance, cast and wrought Ni-base superalloys, turbine blades, turbine discs, quantitative metallography

© 2019 Juraj Belan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
quality assurance, cast and wrought Ni-base superalloys, turbine blades, turbine discs, quantitative metallography