<abstract xmlns="http://www.w3.org/1999/xhtml">

<p> A liquid chromatography-ultraviolet detection method for the determination of florfenicol (FF) and thiamphenicol (TAP) in feeds is presented. The method comprises the extraction of analytes from the matrix with a mixture of methanol and acetonitrile, drying of the extract, and its dissolution in phosphate buffer. The analysis was performed with a gradient programme of the mobile phase composed of acetonitrile and buffer (pH = 7.3) on a Zorbax Eclipse Plus C18 (150 × 4.6 mm, 5 μm) analytical column with UV (λ = 220 nm) detection. The analytical procedure has been successfully adopted and validated for quantitative determination of florfenicol and thiamphenicol in feed samples. Sensitivity, specificity, linearity, repeatability, and intralaboratory reproducibility were included in the validation. The mean recovery of amphenicols was 93.5% within the working range of 50-4000 mg/kg. Simultaneous determination of chloramphenicol, which is banned in the feed, was also included within the same procedure of FF and TAP stability studies. Storing the medicated feed at room temperature for up to one month decreased concentration in the investigated drugs even by 45%. These findings are relevant to successful provision of therapy to animals.</p>
</abstract>

A liquid chromatography-ultraviolet detection method for the determination of florfenicol (FF) and thiamphenicol (TAP) in feeds is presented. The method comprises the extraction of analytes from the matrix with a mixture of methanol and acetonitrile, drying of the extract, and its dissolution in phosphate buffer. The analysis was performed with a gradient programme of the mobile phase composed of acetonitrile and buffer (pH = 7.3) on a Zorbax Eclipse Plus C18 (150 × 4.6 mm, 5 μm) analytical column with UV (λ = 220 nm) detection. The analytical procedure has been successfully adopted and validated for quantitative determination of florfenicol and thiamphenicol in feed samples. Sensitivity, specificity, linearity, repeatability, and intralaboratory reproducibility were included in the validation. The mean recovery of amphenicols was 93.5% within the working range of 50-4000 mg/kg. Simultaneous determination of chloramphenicol, which is banned in the feed, was also included within the same procedure of FF and TAP stability studies. Storing the medicated feed at room temperature for up to one month decreased concentration in the investigated drugs even by 45%. These findings are relevant to successful provision of therapy to animals.

Amphenicols stability in medicated feed – development and validation of liquid chromatography method

Department of Pharmacology and Toxicology

Journal of Veterinary Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

A liquid chromatography-ultraviolet detection method for the determination of florfenicol (FF) and thiamphenicol (TAP) in feeds is presented. The method...

Amphenicols stability in medicated feed – development and validation of liquid chromatography method

Pubblicato online: 20 dic 2014

Pagine: 621 - 629

Ricevuto: 01 ago 2014

Accettato: 14 nov 2014

DOI: https://doi.org/10.2478/bvip-2014-0095

Parole chiave
medicated feed, florfenicol, thiamphenicol, chloramphenicol, HPLC, drug stability

© 2014 National Veterinary Research Institute in Pulawy

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Amphenicols stability in medicated feed – development and validation of liquid chromatography method

Pubblicato online: 20 dic 2014

Pagine: 621 - 629

Ricevuto: 01 ago 2014

Accettato: 14 nov 2014

DOI: https://doi.org/10.2478/bvip-2014-0095

Parole chiavemedicated feed, florfenicol, thiamphenicol, chloramphenicol, HPLC, drug stability

© 2014 National Veterinary Research Institute in Pulawy

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
medicated feed, florfenicol, thiamphenicol, chloramphenicol, HPLC, drug stability