<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The aim of this study was to test the usefulness of magnetron sputtering technology to produce coatings on selected elements of a firefighter’s helmet to protect against infrared radiation (PN-EN 171 standard). The scope of research includes testing the deposition produced via magnetron sputtering of metallic and ceramic coatings on plastics, which are used to manufacture the components comprising the personal protection equipment used by firefighters. The UV-VIS, NIR used to research the permeation coefficients and reflections for light and infrared light and the emission spectrometry with ICP-AES used for the quantitative analysis of elements in metallic and ceramic coatings. Microstructural and micro-analytical testing of the coatings were performed using scanning electron microscopy (SEM). Measurements of the chemical compositions were conducted using energy-dispersive X-ray spectroscopy (EDS). The hardnesss of the coatings were tested using a indentation method, and the coating thicknesses were tested using a ellipsometry method.</p></abstract>

The aim of this study was to test the usefulness of magnetron sputtering technology to produce coatings on selected elements of a firefighter’s helmet to protect against infrared radiation (PN-EN 171 standard). The scope of research includes testing the deposition produced via magnetron sputtering of metallic and ceramic coatings on plastics, which are used to manufacture the components comprising the personal protection equipment used by firefighters. The UV-VIS, NIR used to research the permeation coefficients and reflections for light and infrared light and the emission spectrometry with ICP-AES used for the quantitative analysis of elements in metallic and ceramic coatings. Microstructural and micro-analytical testing of the coatings were performed using scanning electron microscopy (SEM). Measurements of the chemical compositions were conducted using energy-dispersive X-ray spectroscopy (EDS). The hardnesss of the coatings were tested using a indentation method, and the coating thicknesses were tested using a ellipsometry method.

Coatings manufactured using magnetron sputtering technology to protect against infrared radiation for use in firefighter helmets

Institute of Security Technologies “MORATEX”, 3 M. Sklodowskiej-Curie Str., 90-505 Lodz,

Central Institute for Labour Protection – National Research Institute, 48 Wierzbowa Str., 90-133 Lodz,

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The aim of this study was to test the usefulness of magnetron sputtering technology to produce coatings on selected elements of a firefighter’s helmet to...

Coatings manufactured using magnetron sputtering technology to protect against infrared radiation for use in firefighter helmets

Pubblicato online: 13 ott 2016

Pagine: 50 - 58

DOI: https://doi.org/10.1515/pjct-2016-0048

Parole chiave
personal protection equipment, firefighter helmet, protective coatings, infrared radiation magnetron sputtering technology

© by Karolina Olszewska

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Coatings manufactured using magnetron sputtering technology to protect against infrared radiation for use in firefighter helmets

Pubblicato online: 13 ott 2016

Pagine: 50 - 58

DOI: https://doi.org/10.1515/pjct-2016-0048

Parole chiavepersonal protection equipment, firefighter helmet, protective coatings, infrared radiation magnetron sputtering technology

© by Karolina Olszewska

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parole chiave
personal protection equipment, firefighter helmet, protective coatings, infrared radiation magnetron sputtering technology