<abstract xmlns="http://www.w3.org/1999/xhtml">Produced water is actually the wastewater separated from petroleum crude oil. Electrochemical-oxidation experiments was conducted for degradation of 16 priority polycyclic aromatic hydrocarbons (<italic>PAHs</italic>) using DSA type Ti/IrO2 anode. Laboratory scale batch reactor was used for degradation studies. To get the maximum <italic>PAHs</italic> removal electrochemical process optimized on three independent variable current density, pH and electrolysis time. The response surface modelling (RSM) based on a Box-Behnken design was applied to get appropriate experimental design. <italic>X</italic>1, <italic>X</italic>2 and <italic>X</italic>3 are the coded factors of independent variables such as the current density, pH and electrolysis time, respectively. Maximum removal was 95.29% at optimized conditions such as current density of 9 mA/cm2, pH 3 and electrolysis time 3.7 h. Quadratic model was suggested best fit model. The results of the Analysis of Variances (ANOVA) for PAHs demonstrated that the model was highly significant.</abstract>

Produced water is actually the wastewater separated from petroleum crude oil. Electrochemical-oxidation experiments was conducted for degradation of 16 priority polycyclic aromatic hydrocarbons (PAHs) using DSA type Ti/IrO2 anode. Laboratory scale batch reactor was used for degradation studies. To get the maximum PAHs removal electrochemical process optimized on three independent variable current density, pH and electrolysis time. The response surface modelling (RSM) based on a Box-Behnken design was applied to get appropriate experimental design. X1, X2 and X3 are the coded factors of independent variables such as the current density, pH and electrolysis time, respectively. Maximum removal was 95.29% at optimized conditions such as current density of 9 mA/cm2, pH 3 and electrolysis time 3.7 h. Quadratic model was suggested best fit model. The results of the Analysis of Variances (ANOVA) for PAHs demonstrated that the model was highly significant.

Polycyclic aromatic hydrocarbons removal from produced water by electrochemical process optimization

COMSATS Institute of Information Technology Abbottabad

Department of Civil and Environmental Engineering

Ecological Chemistry and Engineering S

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Produced water is actually the wastewater separated from petroleum crude oil. Electrochemical-oxidation experiments was conducted for degradation of 16...

Polycyclic aromatic hydrocarbons removal from produced water by electrochemical process optimization

Pubblicato online: 11 ott 2017

Pagine: 397 - 404

DOI: https://doi.org/10.1515/eces-2017-0026

Parole chiave
electrochemical treatment, produced water, Box Bhenken Design, optimization

© 2017 Asim Yaqub et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Polycyclic aromatic hydrocarbons removal from produced water by electrochemical process optimization

Pubblicato online: 11 ott 2017

Pagine: 397 - 404

DOI: https://doi.org/10.1515/eces-2017-0026

Parole chiaveelectrochemical treatment, produced water, Box Bhenken Design, optimization

© 2017 Asim Yaqub et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
electrochemical treatment, produced water, Box Bhenken Design, optimization