<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In the paper, the method of calculating the welding energy needed to regenerate parts of agricultural machines by welding (joining) or surfacing (rebuilding, hardfacing) is presented. Problems with the lack of adequacy of the commonly used formula for linear welding energy to the actual amount of heat introduced into the welded joint are discussed. A volumetric approach based on the effective amount of heat generated by the electric arc introduced per unit volume of the weld was proposed. The simplified formulas for volumetric energy are presented. The considerations are illustrated with examples of calculations. The analyzed examples include the use of a computerized stand for geometric measurements of metallographic specimens. The proposed volumetric method of calculating the amount of heat introduced into the welded joint is a more realistic indicator of heat demand than linear energy. On the other hand, based on the volume of the weld (padding weld), it allows to determine the amount of energy needed to regenerate machine parts, including agricultural ones.</p></abstract>

In the paper, the method of calculating the welding energy needed to regenerate parts of agricultural machines by welding (joining) or surfacing (rebuilding, hardfacing) is presented. Problems with the lack of adequacy of the commonly used formula for linear welding energy to the actual amount of heat introduced into the welded joint are discussed. A volumetric approach based on the effective amount of heat generated by the electric arc introduced per unit volume of the weld was proposed. The simplified formulas for volumetric energy are presented. The considerations are illustrated with examples of calculations. The analyzed examples include the use of a computerized stand for geometric measurements of metallographic specimens. The proposed volumetric method of calculating the amount of heat introduced into the welded joint is a more realistic indicator of heat demand than linear energy. On the other hand, based on the volume of the weld (padding weld), it allows to determine the amount of energy needed to regenerate machine parts, including agricultural ones.

Estimation of Heat Energy in Regeneration of Agricultural Machine Parts by Welding Methods

Agricultural Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In the paper, the method of calculating the welding energy needed to regenerate parts of agricultural machines by welding (joining) or surfacing (rebuilding,...

Estimation of Heat Energy in Regeneration of Agricultural Machine Parts by Welding Methods

Pubblicato online: 30 set 2020

Pagine: 91 - 100

Ricevuto: 01 ago 2020

Accettato: 01 set 2020

DOI: https://doi.org/10.1515/agriceng-2020-0030

Parole chiave
agricultural machinery, regeneration, welding, surfacing, welding energy

© 2020 Jerzy Winczek et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Estimation of Heat Energy in Regeneration of Agricultural Machine Parts by Welding Methods

Pubblicato online: 30 set 2020

Pagine: 91 - 100

Ricevuto: 01 ago 2020

Accettato: 01 set 2020

DOI: https://doi.org/10.1515/agriceng-2020-0030

Parole chiaveagricultural machinery, regeneration, welding, surfacing, welding energy

© 2020 Jerzy Winczek et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
agricultural machinery, regeneration, welding, surfacing, welding energy