<abstract xmlns="http://www.w3.org/1999/xhtml">

The use of resorbable metallic biomaterials for temporary implants has increased dramatically in the last decade. Degradable biomaterials are desirable in some specific pediatric, orthopedic, and cardiovascular applications, in which they may overcome the disadvantages of permanent devices. The three main biodegradable metals: Mg, Fe, and Zn, are intensively studied as temporary orthopedic implant materials. Among them, iron, and iron-based alloys, have received attention as promising materials for the temporary replacement of bones, especially for applications where strong mechanical support during the bone healing process is required. The addition of a low amount of phosphorus can improve the mechanical properties of such materials without the risk of retarding the corrosion rate or affecting cell proliferation. The main goal of this work was to study the combined effect of phosphating and polymer coating of open-cell iron foams on their cytotoxicity and hemocompatibility. Obtained results indicated the positive influence of the PEG coating layer and phosphorus addition on material cytocompatibility. Moreover, the combination of these procedures led to the inhibition of hemolysis, platelet adhesion, and thrombus formation.
</abstract>

Department of Physical Chemistry, Faculty of Science

Department of Animal Nutrition, Dietetics and Animal Breeding

University of Veterinary Medicine and Pharmacy in Košice

Combined Effect of Phosphate and Polymer Coating on Cytotoxicity and Hemocompatibility of Iron Foams

<abstract xmlns="http://www.w3.org/1999/xhtml">

Advanced high-entropy (Hf-Ta-Zr-Nb-Ti)C ceramics were successfully fabricated by the combination of ball milling and a two-step sintering process at 2100 °C for 5, 10, and 20 minutes from commercially available powders. The microstructure characteristics and mechanical properties of the developed systems were investigated. The high-entropy ceramics exhibit: medium grain size from 8 μm to 11 μm, high compositional uniformity, and high relative density above 99.5 %. Vickers hardness for all systems decreased with increasing applied load, with the highest value HV1 = 22.0 GPa for the system sintered for 5 minutes, while the fracture toughness changed from 2.70 MPa.m1/2 to 3.50 MPa.m1/2. The highest four-point flexural strength of 284 MPa was measured for the system with the smallest grain size.
</abstract>

Technical University of Kosice, Faculty of Materials, Metallurgy, and Recycling

Effect of Sintering Time on Mechanical Properties of (Hf-Ta-Zr-Nb-Ti)C

Announcements: Eva Dudrová – 80 years

AHEAD OF PRINT

Volume 22 (2022): Issue 1 (December 2022)

Volume 21 (2021): Issue 2 (December 2021)

Volume 21 (2021): Issue 1 (June 2021)

Volume 20 (2020): Issue 2 (December 2020)

Volume 20 (2020): Issue 1 (June 2020)

Volume 19 (2019): Issue 2 (December 2019)

Volume 19 (2019): Issue 1 (September 2019)

Volume 18 (2018): Issue 2 (November 2018)

Volume 18 (2018): Issue 1 (June 2018)

Volume 17 (2017): Issue 2 (December 2017)

Volume 17 (2017): Issue 1 (December 2017)

Volume 16 (2016): Issue 2 (December 2016)

Volume 16 (2016): Issue 1 (October 2016)

Powder Metallurgy Progress

 POWDER METALLURGY PROGRESS – international journal of powder technology and powder-derived materials.  POWDER METALLURGY PROGRESS is an international peer-reviewed open-access materials science journal with a more than 20 years long publishing history. Since the establishment in 2001, PMP published a wide variety of quality works, focused mainly on powder metallurgy of metals, the evolution of the technology itself, preparation, properties, and applications of particular materials.  In 2021 after the celebration of the 20th anniversary of the journal, it underwent changes and transformations focused mainly on the publishing interests and scope. Now it is extended to broadly all fields of powder-derived materials and technologies.  Works from the fields of powder metallurgy, metals, alloys, ceramics, and composites, basic and applied research of materials science related to mechanical and functional properties, manufacturing, and characterization are always welcomed.  Actual Scope of the journal:    materials research such as materials physics, materials chemistry, materials engineering, traditional and advanced powder metallurgy, materials processing;  wide range of metal, ceramic and composite materials including metal matrix, ceramic matrix, polymer matrix composites, and hybrid organic-inorganic-metal-ceramic material systems, structural materials, functional materials, biomaterials, porous materials, magnetic electric and multifunctional materials such as magnetic composites, magnetoelectric, magnetocaloric, ferroelectric, piezoelectric, thermoelectric, magneto-optic, magnetostrictive, or high-temperature materials;  advanced as well as traditional production technology and processing, additive manufacturing, 3D printing, Press and Sinter, HIP, MIM, PIM, Spark Plasma Sintering, Hot Pressing, Microwave Sintering, Plasma Treatment, Slip Casting, Rapid Heating, Ultrafast Sintering, new progressive compaction and processing methods;  influence of material processing parameters on their microstructure formation and development and structural relations of physical, mechanical, and functional properties of materials focusing but not limited on powder materials;  special technological processes of PM material with individual-particular-special physical-chemical properties;  environmental issues of production and application of PM materials;  industrial processes, management, and quality, (creation of normative) standard method activity, economical analysis, conception (philosophy) and prediction in PM and progressive material processing field;  production of technological equipment for powder and advanced materials technology.   The owner of the journal: Institute of Materials Research Slovak Academy of Science.  Why subscribe and read  PMP journal is an open-access journal that publishes original theoretical and experimental articles as well as review articles related to all aspects of PM. The journal is peer-reviewed, follows ethical publishing practices, and is searchable, discoverable, and citable.  Why submit  The journal has a distinguished Editorial Board with extensive academic qualifications, ensuring that the journal maintains high scientific standards and has broad international coverage. All manuscripts that are submitted to the PMP journal will NOT BE subject to any Article Processing Charges.  Rejection Rate   16.21 %   Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 

Powder Metallurgy Progress

Volume 21 (2021): Issue 2 (December 2021)

Combined Effect of Phosphate and Polymer Coating on Cytotoxicity and Hemocompatibility of Iron Foams

Effect of Sintering Time on Mechanical Properties of (Hf-Ta-Zr-Nb-Ti)C

Announcements: Eva Dudrová – 80 years

Chercher

Tous les volumes et éditions dans cette revue