Structure, Texture and Tensile Properties of Ti6Al4V Produced by Selective Laser Melting

Bača, A., Konečná, R., Nicoletto, G., Kunz, L., 2016. Influence of Build Direction on the Fatigue Behaviour of Ti6Al4V Alloy Produced by Direct Metal Laser Sintering. Materials Today: Proceedings, 3(4), 921-924, DOI: 10.1016/j.matpr.2016.03.021.10.1016/j.matpr.2016.03.021Open DOISearch in Google Scholar

Bača, A., Konečná, R., Nicoletto, G., 2017. Influence of the Direct Metal Laser Sintering Process on the Fatigue Behavior of the Ti6Al4V Alloy.Materials Science, 891, 317-321, DOI: 10.4028/www.scientific.net/MSF.891.317.10.4028/www.scientific.net/MSF.891.317Open DOISearch in Google Scholar

Facchini, L., Magalini, E., Pierfrancesco, R., Molinari, A., 2009. Micro-structure and mechanical properties of Ti-6Al-4V produced by electron beam melting of pre-alloyed powders, Rapid Prototyping Journal, 15(3), 171-178, DOI: 10.1108/13552540910960262.10.1108/13552540910960262Search in Google Scholar

Gil, F.J., Ginebra, M.P., Manero, J.M., Planell. J.A., 2001. Formation of alpha-Widmanstatten structure: effects of grain size and cooling rate on the Widmanstatten morphologies and on the mechanical properties in Ti6Al4V alloy, Journal of Alloys and Compounds, 329 (1-2), 142-152, DOI: doi.org/10.1016/S0925-8388(01)01571-7.10.1016/S0925-8388(01)01571-7Open DOISearch in Google Scholar

Hollander, D.A., M. von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., Erli, H.J., 2006. Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming, Biomaterials, 27(7), 955-63. DOI: 10.1016/j.biomaterials.2005.07.041.10.1016/j.biomaterials.2005.07.04116115681Search in Google Scholar

Kahlen, F.J., Kar, A., 2001. Tensile Strengths for Laser-Fabricated Parts and Similarity Parameters for Rapid Manufacturing, Journal of Manufacturing Science and Engineering, 123(1), 38-44, DOI: 10.1115/1.1286472.10.1115/1.1286472Open DOISearch in Google Scholar

Konečná, R., Kunz, L., Bača, A., Nicoletto, G. 2016. Long fatigue crack growth in Ti6Al4V produced by direct metal laser sintering, Procedia Engineering, 160, 69-76, DOI: 10.1016/j.proeng.2016.08.864.10.1016/j.proeng.2016.08.864Open DOISearch in Google Scholar

Konečná, R., Nicoletto, G., Bača, A., Kunz, L., 2017. Metallographic Characterization and Fatigue Damage Initiation in Ti6Al4V Alloy Produced by Direct Metal Laser Sintering, Materials Science Forum, 891, 311-316, DOI: 10.4028/www.scientific.net/MSF.891.311.10.4028/www.scientific.net/MSF.891.311Open DOISearch in Google Scholar

Konečná, R., Kunz, L., Bača, A., Nicoletto, G., 2017. Resistance of direct metal laser sintering Ti6Al4V alloy against growth of fatigue cracks. Eng. Fract. Mechanics, 185, 82-91, DOI: 10.1016/j.engfracmech.2017.03.033.10.1016/j.engfracmech.2017.03.033Open DOISearch in Google Scholar

Kruth, J.P., Levy, G., Klocke, F., Childs, T.H.C., 2007. Consolidation phenomena in laser and powder- bed based layered manufacturing, CIRP Annals - Manufacturing Technology, 56(2), 730-759, DOI: 10.1016/j.cirp.2007.10.004.10.1016/j.cirp.2007.10.004Open DOISearch in Google Scholar

Kubiak, K., Sieniawski, J., 1998. Development of the microstructure and fatigue strength of two-phase titanium alloys in the processes of forging and heat treatment, Journal of Materials Processing Technology, 78(1-3), 117-121, DOI: 10.1016/S0924-0136(97)00472-X.10.1016/S0924-0136(97)00472-XOpen DOISearch in Google Scholar

Levy, G.N., 2010. The role and future of the Laser Technology in the Additive. Manufacturing environment, Physics Procedia, 5(A), 65-80, DOI: 10.1016/j.phpro.2010.08.123.10.1016/j.phpro.2010.08.123Open DOISearch in Google Scholar

Lütjering, G., 1998. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys, Materials Science and Engineering: A, 243(1-2), 32-45. DOI: 10.1016/S0921-5093(97)00778-8.10.1016/S0921-5093(97)00778-8Open DOISearch in Google Scholar

Mashl, S.J. 2015. Powder Metallurgy Processing by Hot Isostatic Pressing, ASM Handbook, 7, 260-270, DOI: 10.31399/asm.hb.v07.9781627081757.10.31399/asm.hb.v07.9781627081757Open DOISearch in Google Scholar

Rehme, O., Emmelmann, C., 2005. Reproducibility for properties of selective laser melting products, Proceedings of the Third International WLT-Conference on Lasers in Manufacturing, Munich, 227-232.Search in Google Scholar

Thijs, L., Verhaeghe, F., Craeghs, T., Van Humbeeck, J., Kruth, J. P. 2010. A study of the micro structural evolution during selective laser melting of Ti-6Al-4V, Acta Materialia, 58(9), 3303-3312, DOI: 10.1016/j.actamat.2010.02.004.10.1016/j.actamat.2010.02.004Search in Google Scholar

Vrancken, B., Thijs, L., Kruth, J. P., Van Humbeeck, J. 2012. Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and Mechanical properties, Journal of Alloys and Compounds, 541(0), 177-185, DOI: 10.1016/j.jallcom.2012.07.022.10.1016/j.jallcom.2012.07.022Search in Google Scholar