<abstract xmlns="http://www.w3.org/1999/xhtml"><p>During operation, sterilization and disinfection, the surface working part of dental burs deteriorates. In this study a commercial metallic dental bur with extra coarse gradation (177-250 μ of ceramic embankment), made of a stainless steel were covered with a nickel-diamond composite was examined. The working part of the tool is round-end taper shaped and is intended for crown and bridge preparation. Analysis of microstructure was carried out using Jeol JSM-6610 LV scanning electron microscope with EDX analyzer. After 3 months of operation, the bur can be used for further work in the dental surgery.</p></abstract>

During operation, sterilization and disinfection, the surface working part of dental burs deteriorates. In this study a commercial metallic dental bur with extra coarse gradation (177-250 μ of ceramic embankment), made of a stainless steel were covered with a nickel-diamond composite was examined. The working part of the tool is round-end taper shaped and is intended for crown and bridge preparation. Analysis of microstructure was carried out using Jeol JSM-6610 LV scanning electron microscope with EDX analyzer. After 3 months of operation, the bur can be used for further work in the dental surgery.

Quality control of a metallic dental bur with a diamond coating

Institute for Material Engineering, Faculty of Processing Engineering and Materials Technology

Production Engineering Archives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Quality control of a metallic dental bur with a diamond coating"}

During operation, sterilization and disinfection, the surface working part of dental burs deteriorates. In this study a commercial metallic dental bur with...

Quality control of a metallic dental bur with a diamond coating

Publié en ligne: 14 nov. 2018

Pages: 26 - 29

Reçu: 25 avr. 2018

Accepté: 07 juin 2018

DOI: https://doi.org/10.30657/pea.2018.19.06

Mots clés
dental bur, diamond coating, dental tools, quality control

© 2018 Katarzyna Strzelczak, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Quality control of a metallic dental bur with a diamond coating

Publié en ligne: 14 nov. 2018

Pages: 26 - 29

Reçu: 25 avr. 2018

Accepté: 07 juin 2018

DOI: https://doi.org/10.30657/pea.2018.19.06

Mots clésdental bur, diamond coating, dental tools, quality control

© 2018 Katarzyna Strzelczak, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
dental bur, diamond coating, dental tools, quality control