<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>Epitaxial Lateral Overgrowth (ELO) is a method of epitaxial growth on a partially masked substrate. It can be a promising method for photovoltaic applications due to a possibility of producing thin and high quality silicon substrates. Since the mask prevents propagation of the substrate dislocations to the laterally overgrown parts of the ELO layer they are characterized by a lower dislocation density than the substrate. It means that it is possible to fabricate good quality solar cells on a poor quality Si substrate. The main goal of the research is to obtain a higher growth rate in the lateral direction than in the direction normal to the substrate. The epilayer growth kinetics depends on many technological factors, basically the growth temperature, the cooling rate, the solvent and the mask filling factor. For this reason the best way to achieve the goal is a computational analysis of the epitaxial layer growth process. This work presents a two-dimensional computational study of such a process of growth for different technological conditions. The computational model is based on the assumption of pure diffusion control growth.</p></abstract>

Epitaxial Lateral Overgrowth (ELO) is a method of epitaxial growth on a partially masked substrate. It can be a promising method for photovoltaic applications due to a possibility of producing thin and high quality silicon substrates. Since the mask prevents propagation of the substrate dislocations to the laterally overgrown parts of the ELO layer they are characterized by a lower dislocation density than the substrate. It means that it is possible to fabricate good quality solar cells on a poor quality Si substrate. The main goal of the research is to obtain a higher growth rate in the lateral direction than in the direction normal to the substrate. The epilayer growth kinetics depends on many technological factors, basically the growth temperature, the cooling rate, the solvent and the mask filling factor. For this reason the best way to achieve the goal is a computational analysis of the epitaxial layer growth process. This work presents a two-dimensional computational study of such a process of growth for different technological conditions. The computational model is based on the assumption of pure diffusion control growth.

Finite element method simulation of interface evolution during epitaxial growth

Lublin University of Technology, Nadbystrzycka 38, 20-618, Lublin, Poland

Zhitomir State Technological University, 103 Chernyakhovskogo, vul., 10005, Zhitomir, Ukraine

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Finite element method simulation of interface evolution during epitaxial growth"}

Epitaxial Lateral Overgrowth (ELO) is a method of epitaxial growth on a partially masked substrate. It can be a promising method for photovoltaic applications...

Finite element method simulation of interface evolution during epitaxial growth

Publié en ligne: 14 déc. 2012

Pages: 414 - 418

DOI: https://doi.org/10.2478/s13536-012-0042-z

Mots clés
epitaxial lateral overgrowth, liquid phase epitaxy, computer simulation

© 2012 Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Finite element method simulation of interface evolution during epitaxial growth

Publié en ligne: 14 déc. 2012

Pages: 414 - 418

DOI: https://doi.org/10.2478/s13536-012-0042-z

Mots clésepitaxial lateral overgrowth, liquid phase epitaxy, computer simulation

© 2012 Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
epitaxial lateral overgrowth, liquid phase epitaxy, computer simulation