<abstract xmlns="http://www.w3.org/1999/xhtml">The article deals with the determination of fire characteristics of industrial dust samples. Particle size granulometry and determination of explosion parameters according to EN 14034 (Lower Explosion Limit LEL, Pmax, Kst) are presented. The minimum ignition temperatures of the dust layer and dispersed dust from the hot surface according to EN ISO / IEC 80079-20-2: 2016 were measured. It was found that LEL is 60 g.m−3, Pmax is 8.61 bar, and Kst is 89 bar.s−1.m. The minimum ignition temperature (MIT) of dust layer is 280 ° C and the minimum ignition temperature of dispersed dust is 400 ° C.</abstract>

The article deals with the determination of fire characteristics of industrial dust samples. Particle size granulometry and determination of explosion parameters according to EN 14034 (Lower Explosion Limit LEL, Pmax, Kst) are presented. The minimum ignition temperatures of the dust layer and dispersed dust from the hot surface according to EN ISO / IEC 80079-20-2: 2016 were measured. It was found that LEL is 60 g.m−3, Pmax is 8.61 bar, and Kst is 89 bar.s−1.m. The minimum ignition temperature (MIT) of dust layer is 280 ° C and the minimum ignition temperature of dispersed dust is 400 ° C.

Study of Fire Characteristics of Industrial Dust

Slovak University of Technology in Bratislava

Faculty of Materials Science and Technology in Trnava, Institute of Integral Safety

Research Papers Faculty of Materials Science and Technology Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Study of Fire Characteristics of Industrial Dust"}

The article deals with the determination of fire characteristics of industrial dust samples. Particle size granulometry and determination of explosion...

Study of Fire Characteristics of Industrial Dust

Publié en ligne: 03 sept. 2019

Pages: 49 - 56

Reçu: 30 avr. 2019

Accepté: 18 juin 2019

DOI: https://doi.org/10.2478/rput-2019-0005

Mots clés
Dust layer, dust explosion, minimum ignition temperature, dust cloud

© 2019 Zuzana Szabová et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Study of Fire Characteristics of Industrial Dust

Publié en ligne: 03 sept. 2019

Pages: 49 - 56

Reçu: 30 avr. 2019

Accepté: 18 juin 2019

DOI: https://doi.org/10.2478/rput-2019-0005

Mots clésDust layer, dust explosion, minimum ignition temperature, dust cloud

© 2019 Zuzana Szabová et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
Dust layer, dust explosion, minimum ignition temperature, dust cloud