<abstract xmlns="http://www.w3.org/1999/xhtml"> CuInSe2 (CISe) compound was produced by high-temperature synthesis. After mechanical milling, the average CISe particle size decreased to 10μm. The authors study structural changes of the compound after ablation in liquid by a 1064 nm pulsed laser. The SEM examination indicated the presence of spherical particles with the average size of ~ 450 nm. A nonlinear relationship was established between the laser radiation dose and the quantity of spherical particles. The XRD analysis has shown an improvement in the CISe crystalline structure and the absence of significant changes in its stoichiometry. The 3 μm thick experimental CISe samples were screen-printed on planar Ni electrodes, and improvement also was revealed in their photosensitivity. The conclusion is that the pulsed-laser ablation can be applied to chalcopyrite structures like CISe without destruction of their initial properties. </abstract>

CuInSe2 (CISe) compound was produced by high-temperature synthesis. After mechanical milling, the average CISe particle size decreased to 10μm. The authors study structural changes of the compound after ablation in liquid by a 1064 nm pulsed laser. The SEM examination indicated the presence of spherical particles with the average size of ~ 450 nm. A nonlinear relationship was established between the laser radiation dose and the quantity of spherical particles. The XRD analysis has shown an improvement in the CISe crystalline structure and the absence of significant changes in its stoichiometry. The 3 μm thick experimental CISe samples were screen-printed on planar Ni electrodes, and improvement also was revealed in their photosensitivity. The conclusion is that the pulsed-laser ablation can be applied to chalcopyrite structures like CISe without destruction of their initial properties.

STRUCTURAL CHANGES IN PULSED LASER ABLATED CuInSe2 COMPOUND STRUKTURĀLĀS IZMAIŅAS IMPULSA LĀZERA ABLĒTAJĀ CuInSe2 SAVIENOJUMĀ

G.Libert’s Innovative Microscopy Centre, Daugavpils University, 1 Parades Str., augavpils, LV-5401, LATVIA

Latvian Journal of Physics and Technical Sciences

STRUCTURAL CHANGES IN PULSED LASER ABLATED CuInSe COMPOUND STRUKTURĀLĀS IZMAIŅAS IMPULSA LĀZERA ABLĒTAJĀ CuInSe SAVIENOJUMĀ

CuInSe2 (CISe) compound was produced by high-temperature synthesis. After mechanical milling, the average CISe particle size decreased to 10μm. The authors...

STRUCTURAL CHANGES IN PULSED LASER ABLATED CuInSe₂ COMPOUND STRUKTURĀLĀS IZMAIŅAS IMPULSA LĀZERA ABLĒTAJĀ CuInSe₂ SAVIENOJUMĀ

Publié en ligne: 29 janv. 2014

Pages: 54 - 60

DOI: https://doi.org/10.2478/lpts-2013-0040

This content is open access.