<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Today, advanced countries compete enormously for further exploitation in the offshore area, for its enormous fresh resources and space. Therefore, these competitions will double the importance of these types of structures. As it is known, the most important part in the design of the offshore structures is the design of the piles on which the structure will be placed. Engineers have always been trying to build these types of structures with the least cost and the highest safety factor. In this research, the effect of distance and the ratio of the elliptical pile diameters on the strength of the pile group was evaluated using numerical modeling. Five different states of diameter ratios including: 1.2, 1.4, 2, 2.5, 3 and five different distance ratios were investigated. The results demonstrate that with the increase in the diameter ratio, the amount of force decreases while it increases as the distance ratio rises.</p></abstract>

Today, advanced countries compete enormously for further exploitation in the offshore area, for its enormous fresh resources and space. Therefore, these competitions will double the importance of these types of structures. As it is known, the most important part in the design of the offshore structures is the design of the piles on which the structure will be placed. Engineers have always been trying to build these types of structures with the least cost and the highest safety factor. In this research, the effect of distance and the ratio of the elliptical pile diameters on the strength of the pile group was evaluated using numerical modeling. Five different states of diameter ratios including: 1.2, 1.4, 2, 2.5, 3 and five different distance ratios were investigated. The results demonstrate that with the increase in the diameter ratio, the amount of force decreases while it increases as the distance ratio rises.

Investigating the Effect of Distance and Diameter Ratio of Elliptical Piles on the Amount of Force Exerted by Waves in the Pile Groups with Regular Layout

Department of Offshore Structures, Faculty of Marine Engineering

Khorramshahr University of Marine Science and Technology

Journal of Applied Engineering Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Today, advanced countries compete enormously for further exploitation in the offshore area, for its enormous fresh resources and space. Therefore, these...

Investigating the Effect of Distance and Diameter Ratio of Elliptical Piles on the Amount of Force Exerted by Waves in the Pile Groups with Regular Layout

Publié en ligne: 20 août 2018

Pages: 37 - 46

Reçu: 18 déc. 2017

Accepté: 30 janv. 2018

DOI: https://doi.org/10.2478/jaes-2018-0005

Mots clés
Wave forces, Pile Groups, Elliptical Piles, Numerical Modeling

© 2018 M. Ghatarband et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Investigating the Effect of Distance and Diameter Ratio of Elliptical Piles on the Amount of Force Exerted by Waves in the Pile Groups with Regular Layout

Publié en ligne: 20 août 2018

Pages: 37 - 46

Reçu: 18 déc. 2017

Accepté: 30 janv. 2018

DOI: https://doi.org/10.2478/jaes-2018-0005

Mots clésWave forces, Pile Groups, Elliptical Piles, Numerical Modeling

© 2018 M. Ghatarband et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
Wave forces, Pile Groups, Elliptical Piles, Numerical Modeling