<abstract xmlns="http://www.w3.org/1999/xhtml"> The binding potential of fly ash (FA) as a typical basic component of building mixtures can be improved in mechanical way, which unfolds new possibilities of its utilization. This paper presents the possibilities of preparing the geopolymer mixtures based on ground (dm = 31.0 μm) FA, used in varying percentages to the original (unground; dm = 74.1 μm) one. As a modification, fine-grain sludge from the process of washing the crushed aggregates was used as filler in order to obtain mortar-type material. The basic physical-mechanical properties of mixtures are presented and discussed in the paper, focusing on time dependence. The following standard tests were executed after 2, 7, 28, and 120 days: density, total water absorption, flexural strength, and compressive strength. Ground FA provided for positive effect in all tested parameters, while incorporation of fine portion of sludge into the geopolymer mixture does not offer a significant technical profit. On the other hand, it does not cause the decline in the properties, so the environmental effect (reduction of environmental burden) can be applied through its incorporation into the geopolymer mixtures.</abstract>

The binding potential of fly ash (FA) as a typical basic component of building mixtures can be improved in mechanical way, which unfolds new possibilities of its utilization. This paper presents the possibilities of preparing the geopolymer mixtures based on ground (dm = 31.0 μm) FA, used in varying percentages to the original (unground; dm = 74.1 μm) one. As a modification, fine-grain sludge from the process of washing the crushed aggregates was used as filler in order to obtain mortar-type material. The basic physical-mechanical properties of mixtures are presented and discussed in the paper, focusing on time dependence. The following standard tests were executed after 2, 7, 28, and 120 days: density, total water absorption, flexural strength, and compressive strength. Ground FA provided for positive effect in all tested parameters, while incorporation of fine portion of sludge into the geopolymer mixture does not offer a significant technical profit. On the other hand, it does not cause the decline in the properties, so the environmental effect (reduction of environmental burden) can be applied through its incorporation into the geopolymer mixtures.

Basic Physical – Mechanical Properties of Geopolymers Depending on the Content of Ground Fly Ash and Fines of Sludge

Selected Scientific Papers - Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The binding potential of fly ash (FA) as a typical basic component of building mixtures can be improved in mechanical way, which unfolds new possibilities of...

Basic Physical – Mechanical Properties of Geopolymers Depending on the Content of Ground Fly Ash and Fines of Sludge

Publié en ligne: 22 juil. 2017

Pages: 85 - 96

DOI: https://doi.org/10.1515/sspjce-2017-0009

Mots clés
geopolymer, fly ash, washing aggregate sludge, grinding, strength, water absorption

© 2017 Alena Sičáková, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Basic Physical – Mechanical Properties of Geopolymers Depending on the Content of Ground Fly Ash and Fines of Sludge

Publié en ligne: 22 juil. 2017

Pages: 85 - 96

DOI: https://doi.org/10.1515/sspjce-2017-0009

Mots clésgeopolymer, fly ash, washing aggregate sludge, grinding, strength, water absorption

© 2017 Alena Sičáková, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
geopolymer, fly ash, washing aggregate sludge, grinding, strength, water absorption