[1. Galvez Diaz-Rubio F., Cendon Franco D., Sanchez-Galvez V.: Fracture strength of welded aluminium joints in commercial road vehicles, Engineering Failure Analysis, Vol. 13, No 2, 2006; pp. 260-270.10.1016/j.engfailanal.2005.01.013]Search in Google Scholar
[2. Ktari A., Haddar N., Ayedi H.F.: Fatigue fracture expertise of train engine crankshafts, Engineering Failure Analysis, Vol, 18, No 3, 2011, pp. 1085-1093.10.1016/j.engfailanal.2011.02.007]Search in Google Scholar
[3. Fonte M., Reis L., Freitas M.: Failure analysis of a gear wheel of a marine azimuth thruster, Engineering Failure Analysis, Vol 18, No 7, 2011, pp. 1884-1888.10.1016/j.engfailanal.2011.07.009]Search in Google Scholar
[4. The Aluminum Association: International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys, The Aluminum Association, Arlington, USA, 2015.]Search in Google Scholar
[5. Braun R.: On the stress corrosion cracking behaviour of 6XXX series aluminium alloys, International Journal of Material Research, Vol. 101, No 5, 2010, pp. 657-668.10.3139/146.110314]Search in Google Scholar
[6. Kyzioł L.: Analysis of fracture toughness of modified timber, Polish Maritime Research, Vol. 17, No 4(67), 2010, pp. 59-63.10.2478/v10012-010-0037-9]Search in Google Scholar
[7. Noda N.A., Xu C.H.: Controlling parameter of the SIFs for a planar interfacial crack in three-dimensional bimaterials. International Journal of Solids and Structures, Vol. 45, 2008, pp. 1017-1031.10.1016/j.ijsolstr.2007.09.013]Search in Google Scholar
[8. Li J., Wang X., Tan C.L.: Weight functions for the determination of SIF and T-stress for edge-cracked plates with built-in ends. International Journal of Pressure Vessels and Piping, Vol. 81, 2004, pp. 285-296.10.1016/j.ijpvp.2003.12.013]Search in Google Scholar
[9. Morais A.B.. Calculation of SIFs by the force method. Engineering Fracture Mechanics Vol. 74, 2007, pp. 739-750.10.1016/j.engfracmech.2006.06.017]Search in Google Scholar
[10. Freese C.E., Baratta F.I.: Single edge-crack SIF solutions. Engineering Fracture Mechanics, Vol. 73, 2006, pp. 616-625.10.1016/j.engfracmech.2005.09.003]Search in Google Scholar
[11. Tada H., Paris P.C., Irwin G.R.: The stress analysis of crack handbook. 3rd ed. New York: ASME Press; 2000.10.1115/1.801535]Search in Google Scholar
[12. Chow W.T., Atluri S.N.. Fracture and fatigue analysis of curved or kinked cracks near fastener holes. Finite Element Analysis and Design, Vol. 23, 1996, pp. 91-100.10.1016/S0168-874X(96)80001-1]Search in Google Scholar
[13. Anand A., Sudev L.J., Lakshminarayana H.V.: Determination of SIF for a Crack Emanating From a Rivet Hole in a Plate using Displacement Extrapolation Method. Journal of Applied Sciences, Vol. 12, No. 10, 2012, 1020-1025.10.3923/jas.2012.1020.1025]Search in Google Scholar
[14. Chen Y.Z., Lin X.Y., Wang Z.X.: A semi-analytic solution for multiple curved cracks emanating from circular hole using singular integral equation. Applied Mathematical Computations, Vol. 213, No 2, 2009, pp. 389-404.10.1016/j.amc.2009.03.021]Search in Google Scholar
[15. Miao C., Wei Y., Yan X.: Interactions of two collinear circular hole cracks subjected to internal pressure. Applied Mathematical Computations, Vol. 223, 2013, pp. 216-224.10.1016/j.amc.2013.08.008]Search in Google Scholar
[16. Abdelmoula R., Semani K., Li J.: Analysis of cracks originating at the boundary of a circular hole in an infinite plate by using a new conformal mapping approach. Applied Mathematical Computations, Vol. 188, No 2, 2007, pp. 1891-1896.10.1016/j.amc.2006.11.052]Search in Google Scholar
[17. Guo J.H., Lu Z.X., Han H.T., Yang Z.: Exact solutions for anti-plane problem of two asymmetrical edge cracks emanating from an elliptical hole in a piezoelectric material. Internationa Journal of Solids and Structures, Vol. 46, No 21, 2009, pp. 3799-3809.10.1016/j.ijsolstr.2009.07.002]Search in Google Scholar
[18. [18] Boljanović S., Maksimović S.: Mixed mode crack growth simulation with/without overloads. International Journal of Fatigue, Vol. 67, 2014, pp. 183-190.10.1016/j.ijfatigue.2013.11.011]Search in Google Scholar
[19. Simionescu P.A., Talpasanu I.: Synthesis and analysis of the steering system of an adjustable tread-width four-wheel tractor. Mechanisms and Machine Theory, Vol. 42, No 5, 2007, pp. 526-540.10.1016/j.mechmachtheory.2006.06.001]Search in Google Scholar
[20. Altenhof W., Paonessa S., Zamani N., Gaspar R.: An experimental and finite element investigation into the energy absorption characteristics of a steering wheel armature in an impact. International Journal of Impact Engineering,Vol. 27, No. 2, 2002, pp. 197-21210.1016/S0734-743X(01)00038-0]Search in Google Scholar
[21. Mossey M.E. et al.: Evaluation of four steering wheels to determine driver hand placement in a static environment. Applied Ergonomics, Vol. 45, No 4, 2014, pp. 1187-1195.10.1016/j.apergo.2014.02.00824674782]Search in Google Scholar
[22. Cartwright, D.J., Ratcliffe, G.A.: Strain Energy Release Rate for Radial Cracks Emanating from a Pin Loaded Hole. International Journal of Fracture Mechanics, Vol. 8, No 2, 1972, pp. 175-181.10.1007/BF00703879]Search in Google Scholar
[23. Newman J.C., Yamada Y., James M.A.: Stress-intensityfactor equations for compact specimen subjected to concentrated forces, Engineering Fracture Mechanics, Vol. 77, No 6, 2010, pp. 1025-1029.10.1016/j.engfracmech.2010.02.012]Search in Google Scholar
[24. Huang W., Garbatov Y., Guedes Soares C.: Fatigue reliability assessment of a complex welded structure subjected to multiple cracks, Engineering Structures Vol. 56, 2013, pp. 868-879.10.1016/j.engstruct.2013.06.011]Search in Google Scholar
[25. Barsoum R.S.: On the use of isoparametric finite elements in linear fracture mechanics, International Journal for Numerical Methods in Engineering, Vol. 10, 1976, pp. 25-62.10.1002/nme.1620100103]Search in Google Scholar