<abstract xmlns="http://www.w3.org/1999/xhtml">The influence of scatter of principal input parameters of the forging system on the dimensional accuracy of product and on the tool life for closed-die forging process is presented in this paper. Scatter of the essential input parameters for the closed-die upsetting process was adjusted to the maximal values that enabled the reliable production of a dimensionally accurate product at optimal tool life. An operating window was created in which exists the maximal scatter of principal input parameters for the closed-die upsetting process that still ensures the desired dimensional accuracy of the product and the optimal tool life. Application of the adjustment of the process input parameters is shown on the example of making an inner race of homokinetic joint from mass production. High productivity in manufacture of elements by cold massive extrusion is often achieved by multiple forming operations that are performed simultaneously on the same press. By redesigning the time sequences of forming operations at multistage forming process of starter barrel during the working stroke the course of the resultant force is optimized.</abstract>

Faculty of Natural Sciences and Engineering

Centre for Computational Continuum Mechanics

Reliability of system for precise cold forging

<abstract xmlns="http://www.w3.org/1999/xhtml">The sustainable development of an organisation is monitored through the organisation’s performance, which beforehand incorporates all stakeholders’ requirements in its strategy. The strategic management concept enables organisations to monitor and evaluate their effectiveness along with efficiency by monitoring of the implementation of set strategic goals. In the process of monitoring and measuring effectiveness, an organisation can use multiple-criteria decision-making methods as help. This study uses the method of analytic network process (ANP) to define the weight factors of the mutual influences of all the important elements of an organisation’s strategy. The calculation of an organisation’s effectiveness is based on the weight factors and the degree of fulfilment of the goal values of the strategic map measures. New business conditions influence the changes in the importance of certain elements of an organisation’s business in relation to competitive advantage on the market, and on the market, increasing emphasis is given to non-material resources in the process of selection of the organisation’s most important measures.</abstract>

Measurement of company effectiveness using analytic network process method

<abstract xmlns="http://www.w3.org/1999/xhtml">This study assessed the physico-chemical status of sediments in the Agbede Wetlands with the aim to create a reference archive for the Edo North catchment and to further identify the characteristics mostly influenced by the natural and anthropogenic activities going on at the watershed. Nutrients, zinc, nickel and lead were identified to be mostly of anthropogenic origin, while alkali metals and alkaline earth metals were from both anthropogenic and natural sources. The clustering of stations 1 and 4 indicates that the sediment quality in the lentic systems was not completely excluded from the lotic system, suggesting that principal component analysis (PCA) and cluster analysis (CA) techniques are invaluable tools for identifying factors influencing the sediment quality. The mean values of the particle size distribution were in the following order across the ecosystems: sand (61.86–80.53%) > silt (9.75–30.34%) > clay (7.83–13.89%). The contamination of the water bodies was primarily derived from agricultural run-offs and through geochemical weathering of the top soils. Therefore, our analysis indicates that the concentrations of cations, anions and nutrients in the sediments of the lotic and lentic ecosystems in Agbede Wetlands are not at an alarming level.</abstract>

Physico-chemical trends in the sediments of Agbede Wetlands, Nigeria

AHEAD OF PRINT

Volume 69 (2022): Issue 2 (December 2022)

Volume 69 (2022): Issue 1 (June 2022)

Volume 68 (2021): Issue 2 (December 2021)

Volume 68 (2021): Issue 1 (March 2021)

Volume 67 (2020): Issue 4 (December 2020)

Volume 67 (2020): Issue 3 (September 2020)

Volume 67 (2020): Issue 2 (June 2020)

Volume 67 (2020): Issue 1 (March 2020)

Volume 66 (2019): Issue 4 (December 2019)

Volume 66 (2019): Issue 3 (December 2019)

Volume 66 (2019): Issue 2 (June 2019)

Volume 66 (2019): Issue 1 (March 2019)

Volume 65 (2018): Issue 4 (December 2018)

Volume 65 (2018): Issue 3 (September 2018)

Volume 65 (2018): Issue 2 (September 2018)

Volume 65 (2018): Issue 1 (March 2018)

Volume 64 (2017): Issue 4 (December 2017)

Volume 64 (2017): Issue 3 (September 2017)

Volume 64 (2017): Issue 2 (July 2017)

Volume 64 (2017): Issue 1 (March 2017)

Volume 63 (2016): Issue 4 (December 2016)

Volume 63 (2016): Issue 3 (September 2016)

Volume 63 (2016): Issue 2 (July 2016)

Volume 63 (2016): Issue 1 (May 2016)

Materials and Geoenvironment

 Description:  Old title: Rudarsko-metalurški zbornik (Mining and Metallurgy Quaterly).  Is issued quarterly by the Faculty of Natural Sciences and Engineering, Ljubljana, Velenje Coal Mine, Velenje, Institute for Mining, Geotechnology and Environment (IRGO), Ljubljana and Slovenian Chamber of Engineers, Ljubljana.  Financially supported also by Ministry of Higher Education, Science and Technology Republic of Slovenia.  Issues up to the volume 62 you can find on our old web page at address: www.rmz-mg.com/contents.htm  The journal does not have article processing charges (APCs) nor article submission charges.  Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 

Materials and Geoenvironment

Volume 64 (2017): Issue 2 (July 2017)

Reliability of system for precise cold forging

Measurement of company effectiveness using analytic network process method

Physico-chemical trends in the sediments of Agbede Wetlands, Nigeria

Buscar

Todos los volúmenes y ediciones en esta revista