<abstract xmlns="http://www.w3.org/1999/xhtml">The paper presents results of research aimed at determining the corrosive properties of steel with cathode metal coating in selected corrosive environments. The corrosion properties of the tin coated steel were evaluated using electrochemical impedance spectroscopy and potentiodynamic tests. For realised measurements, distilled water, 0.5 mol dm−3 NaCl solution, 0.1 mol dm−3 NaCl solution and SARS, which simulates acid rain were used as corrosive solutions. Both corrosion methods are suitable for diagnosing corrosion properties of steel with metal coatings.</abstract>

The evaluation of corrosion properties of coated materials by utilization of EIS

<abstract xmlns="http://www.w3.org/1999/xhtml">Polarization curves measured in a sufficiently aggressive environment (e.g. 0.5 mol dm−3 of H2SO4) may help to assess corrosion resistance of stainless steels. New phases precipitate in steel exposed long-term to high temperatures, which may affect the corrosion resistance. Potentiostatic polarization curves were measured on austenitic steel Super304H in a solution annealed state (from the producer) and in a state aged for 15 000 hours at temperatures of 650, 675 and 700 °C. The higher level of current density in passivity (worse corrosion resistance) was reported after aging at 650 °C.</abstract>

Anodic polarization curves of austenitic steel Super304H in sulphuric acid solution

<abstract xmlns="http://www.w3.org/1999/xhtml">Accelerated corrosion testing is indispensable for material selection, quality control and both initial and residual life time prediction for bare and painted metallic, polymeric, adhesive and other materials in atmospheric exposure conditions. The best known Neutral Salt Spray (NSS) test provides unrealistic conditions and poor correlation to exposures in atmosphere. Modern cyclic accelerated corrosion tests include intermittent salt spray, wet and dry phases and eventually other technical phases. They are able to predict the material performance in service more correctly as documented on several examples. The use of NSS should thus be restricted for quality control.</abstract>

Accelerated cyclic corrosion tests

<abstract xmlns="http://www.w3.org/1999/xhtml">The case study of chimney liner corrosion addresses three specific cases of damage of chimney systems from of stainless steels. These systems were used for flue of gas arising from the combustion of brown coal in small automatic boilers, which are used for heating. Detailed analyzes implied that the cause of devastating corrosion of the steel AISI 316 and 304 steel (CSN 17349, 17241) was particularly high content of halides (chlorides and fluorides), which caused a severe pitting corrosion, which led up to the perforation of the liner material. Simultaneous reduction of the thickness of the used sheets was due to by the general corrosion, which was caused by the sulfur in the solid fuel. The condensation then led to acid environment and therefore the corrosion below the dew point of the sulfuric acid has occurred. All is documented by metallographic analysis and microanalysis of the corrosion products.</abstract>

VŠB-TU Ostrava, Výzkumné energetické centrum

VŠB-TU Ostrava, Katedra materiálového inženýrství

Evaluation of corrosion attack of chimney liners

<abstract xmlns="http://www.w3.org/1999/xhtml">The study summarises current knowledge on microbial corrosion in a deep nuclear-waste repository. The first part evaluates the general impact of microbial activity on corrosion mechanisms. Especially, the impact of microbial metabolism on the environment and the impact of biofilms on the surface of structure materials were evaluated. The next part focuses on microbial corrosion in a deep nuclear-waste repository. The study aims to suggest the development of the repository environment and in that respect the viability of bacteria, depending on the probable conditions of the environment, such as humidity of bentonite, pressure in compact bentonite, the impact of ionizing radiation, etc. The last part is aimed at possible techniques for microbial corrosion mechanism monitoring in the conditions of a deep repository. Namely, electrochemical and microscopic techniques were discussed.</abstract>

VŠCHT Praha, Ústav kovových materiálů a korozního inženýrství

Microbial corrosion of metallic materials in a deep nuclear-waste repository

AHEAD OF PRINT

Volume 68 (2024): Issue 1 (March 2024)

Volume 67 (2023): Issue 1 (May 2023)

Volume 66 (2022): Issue 1 (January 2022)

Volume 65 (2021): Issue 4 (December 2021)

Volume 65 (2021): Issue 3 (November 2021)

Volume 65 (2021): Issue 2 (September 2021)

Volume 65 (2021): Issue 1 (May 2021)

Volume 64 (2020): Issue 4 (December 2020)

Volume 64 (2020): Issue 3 (October 2020)

Volume 64 (2020): Issue 2 (June 2020)

Volume 64 (2020): Issue 1 (March 2020)

Volume 63 (2019): Issue 4 (December 2019)

Volume 63 (2019): Issue 3 (November 2019)

Volume 63 (2019): Issue 2 (June 2019)

Volume 63 (2019): Issue 1 (March 2019)

Volume 62 (2018): Issue 4 (December 2018)

Volume 62 (2018): Issue 3 (July 2018)

Volume 62 (2018): Issue 2 (May 2018)

Volume 62 (2018): Issue 1 (February 2018)

Volume 61 (2017): Issue 5 (December 2017)

Volume 61 (2017): Issue 4 (October 2017)

Volume 61 (2017): Issue 3 (July 2017)

Volume 61 (2017): Issue 2 (April 2017)

Volume 61 (2017): Issue 1 (March 2017)

Volume 60 (2016): Issue 5 (December 2016)

Volume 60 (2016): Issue 4 (December 2016)

Volume 60 (2016): Issue 3 (September 2016)

Volume 60 (2016): Issue 2 (June 2016)

Volume 60 (2016): Issue 1 (March 2016)

Volume 59 (2015): Issue 4 (December 2015)

Volume 59 (2015): Issue 3 (November 2015)

Volume 59 (2015): Issue 2 (July 2015)

Volume 59 (2015): Issue 1 (April 2015)

Volume 58 (2014): Issue 4 (December 2014)

Volume 58 (2014): Issue 3 (November 2014)

Volume 58 (2014): Issue 2 (June 2014)

Volume 58 (2014): Issue 1 (March 2014)

Volume 57 (2013): Issue 4 (December 2013)

Volume 57 (2013): Issue 3 (September 2013)

Volume 57 (2013): Issue 2 (June 2013)

Volume 57 (2013): Issue 1 (March 2013)

Volume 56 (2012): Issue 4 (December 2012)

Volume 56 (2012): Issue 3 (October 2012)

Volume 56 (2012): Issue 2 (July 2012)

Volume 56 (2012): Issue 1 (March 2012)

Koroze a ochrana materiálu

The journal is primarily focused on corrosion engineering and surface treatment of metallic materials. We accept also articles concerning degradation of paints, enamels and other non-metallic materials used for corrosion prevention of metals. Another field of interest is conservation and restoration of cultural heritage. In this case we accept contributions concerning all materials (metals, wood, paper, leather, textiles, stone, glass and ceramics).  Why subscribe and read   Official Journal of the Association of Czech and Slovak Corrosion Engineers, premier source of high quality research results from all over the world with special emphasis on Central and Eastern Europe;  over 55 years of experience in publishing original papers dealing with corrosion science, engineering and technology;  focused on research in corrosion and surface treatment as well as experiences in practice and „case studies“;  original papers that advance understanding of both the fundamentals of corrosion and its application;  excellent articles authored by researchers from all over the world, who appreciate our fast, fair and constructive peer review provided by experts in the field of corrosion engineering.   Why submit   Fast, fair and constructive peer review  Fast publication process („submission→published article“ takes usually 3-6 months)  High quality electronic publication technologies  Open access (simple and charge-free access for every researcher)   Rejection Rate   10%   Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 