<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>The authors present the results of tooth zone optimization for a double-fed induction generator able to operate at a low speed. The generator has a large number of pole pairs, all the windings are placed on the stator, with a winding-less toothed rotor. The optimization concerns the geometry of the tooth zone and is achieved by making the pole extension of trapezoidal shape instead of circular, which allows a 4% increase in the generated power.</p></abstract>

The authors present the results of tooth zone optimization for a double-fed induction generator able to operate at a low speed. The generator has a large number of pole pairs, all the windings are placed on the stator, with a winding-less toothed rotor. The optimization concerns the geometry of the tooth zone and is achieved by making the pole extension of trapezoidal shape instead of circular, which allows a 4% increase in the generated power.

An Optimized Tooth Zone for the Low-Speed Double-Fed Induction Generator

Institute of Physical Energetics, 21 Aizkraukles Str., LV-1006, Riga, LATVIA

Riga Technical University, 1 Kaļķu Str., LV-1050, Riga, LATVIA

Latvian Journal of Physics and Technical Sciences

{"article-title":"An Optimized Tooth Zone for the Low-Speed Double-Fed Induction Generator"}

The authors present the results of tooth zone optimization for a double-fed induction generator able to operate at a low speed. The generator has a large...

An Optimized Tooth Zone for the Low-Speed Double-Fed Induction Generator

Publicado en línea: 10 feb 2011

Páginas: 3 - 10

DOI: https://doi.org/10.2478/v10047-010-0032-z

This content is open access.