<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The article deals with numerical analyses of a Continuous Flight Auger (CFA) pile. The analyses include a comparison of calculated and measured load-settlement curves as well as a comparison of the load distribution over a pile's length. The numerical analyses were executed using two types of software, i.e., Ansys and Plaxis, which are based on FEM calculations. Both types of software are different from each other in the way they create numerical models, model the interface between the pile and soil, and use constitutive material models. The analyses have been prepared in the form of a parametric study, where the method of modelling the interface and the material models of the soil are compared and analysed. </p><p>Our analyses show that both types of software permit the modelling of pile foundations. The Plaxis software uses advanced material models as well as the modelling of the impact of groundwater or overconsolidation. The load-settlement curve calculated using Plaxis is equal to the results of a static load test with a more than 95 % degree of accuracy. In comparison, the load-settlement curve calculated using Ansys allows for the obtaining of only an approximate estimate, but the software allows for the common modelling of large structure systems together with a foundation system.</p></abstract>

The article deals with numerical analyses of a Continuous Flight Auger (CFA) pile. The analyses include a comparison of calculated and measured load-settlement curves as well as a comparison of the load distribution over a pile's length. The numerical analyses were executed using two types of software, i.e., Ansys and Plaxis, which are based on FEM calculations. Both types of software are different from each other in the way they create numerical models, model the interface between the pile and soil, and use constitutive material models. The analyses have been prepared in the form of a parametric study, where the method of modelling the interface and the material models of the soil are compared and analysed. Our analyses show that both types of software permit the modelling of pile foundations. The Plaxis software uses advanced material models as well as the modelling of the impact of groundwater or overconsolidation. The load-settlement curve calculated using Plaxis is equal to the results of a static load test with a more than 95 % degree of accuracy. In comparison, the load-settlement curve calculated using Ansys allows for the obtaining of only an approximate estimate, but the software allows for the common modelling of large structure systems together with a foundation system.

Comparison of Numerical Analyses with a Static Load Test of a Continuous Flight Auger Pile

Department of Structural Mechanics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia

Department of Geotechnics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia

Slovak Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The article deals with numerical analyses of a Continuous Flight Auger (CFA) pile. The analyses include a comparison of calculated and measured load-settlement...

Comparison of Numerical Analyses with a Static Load Test of a Continuous Flight Auger Pile

Publicado en línea: 06 feb 2015

Páginas: 1 - 10

DOI: https://doi.org/10.2478/sjce-2014-0017

Palabras clave
Pile foundations, replacement piles, CFA piles, numerical analysis, pile design, static load test of pile

© Faculty of Civil Engineering, Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Comparison of Numerical Analyses with a Static Load Test of a Continuous Flight Auger Pile

Publicado en línea: 06 feb 2015

Páginas: 1 - 10

DOI: https://doi.org/10.2478/sjce-2014-0017

Palabras clavePile foundations, replacement piles, CFA piles, numerical analysis, pile design, static load test of pile

© Faculty of Civil Engineering, Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Pile foundations, replacement piles, CFA piles, numerical analysis, pile design, static load test of pile