<abstract xmlns="http://www.w3.org/1999/xhtml">Proposed paper deals with experimental tests performed on the Nieman M01 FZG test rig. Experiments were carried out in accordance with STN 65 6280 standard for FZG scuffing tests, from which load values for each load level were obtained. HCR gears made of 16MnCr5 material were utilized during experimental tests. Gear surface was deposited by PVD coatings of nACRo4 and TiAlN + DLC. Conventional lubricant MADIT PP 90H and biological lubricant OMW Biogear S150 were selected for lubrication environments. Aim of the experimental tests lied in application and comparison of PVD coatings deposited on HCR gears. Values of the maximum height of the assessed profile <italic>Rz</italic> for tip and reference diameters were measured after each load level. Results of experimental tests were statistically processed and relations between the maximum height of assessed profile <italic>Rz</italic> and load levels for both utilized coatings in both environments were established on the basis of these results.</abstract>

Proposed paper deals with experimental tests performed on the Nieman M01 FZG test rig. Experiments were carried out in accordance with STN 65 6280 standard for FZG scuffing tests, from which load values for each load level were obtained. HCR gears made of 16MnCr5 material were utilized during experimental tests. Gear surface was deposited by PVD coatings of nACRo4 and TiAlN + DLC. Conventional lubricant MADIT PP 90H and biological lubricant OMW Biogear S150 were selected for lubrication environments. Aim of the experimental tests lied in application and comparison of PVD coatings deposited on HCR gears. Values of the maximum height of the assessed profile Rz for tip and reference diameters were measured after each load level. Results of experimental tests were statistically processed and relations between the maximum height of assessed profile Rz and load levels for both utilized coatings in both environments were established on the basis of these results.

Comparison of PVD Coatings Nacro4 and TIALN + DLC Deposited on High Contact Ratio Gearing Interacting With Conventional and Ecological Lubricants

Slovak University of Agriculture in Nitra

Slovak University of Technology in Bratislava

Acta Technologica Agriculturae

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Comparison of PVD Coatings Nacro and TIALN + DLC Deposited on High Contact Ratio Gearing Interacting With Conventional and Ecological Lubricants

Proposed paper deals with experimental tests performed on the Nieman M01 FZG test rig. Experiments were carried out in accordance with STN 65 6280 standard for...

Comparison of PVD Coatings Nacro⁴ and TIALN + DLC Deposited on High Contact Ratio Gearing Interacting With Conventional and Ecological Lubricants

Publicado en línea: 13 jun 2019

Páginas: 48 - 55

DOI: https://doi.org/10.2478/ata-2019-0009

Palabras clave
HCR gearing, PVD coating nACRo, PVD coating TiAlN + DLC, FZG scuffing test, ecological oil introduction

© 2019 Adam Fürstenzeller et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Comparison of PVD Coatings Nacro4 and TIALN + DLC Deposited on High Contact Ratio Gearing Interacting With Conventional and Ecological Lubricants

Publicado en línea: 13 jun 2019

Páginas: 48 - 55

DOI: https://doi.org/10.2478/ata-2019-0009

Palabras claveHCR gearing, PVD coating nACRo, PVD coating TiAlN + DLC, FZG scuffing test, ecological oil introduction

© 2019 Adam Fürstenzeller et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Comparison of PVD Coatings Nacro⁴ and TIALN + DLC Deposited on High Contact Ratio Gearing Interacting With Conventional and Ecological Lubricants

Palabras clave
HCR gearing, PVD coating nACRo, PVD coating TiAlN + DLC, FZG scuffing test, ecological oil introduction