<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Computer Aided Engineering (CAE) is commonly used in modern design of the various types of structures. There are two main issues/aspects that should be consider while using CAE in Geotechnics: the basic theory and material model. The paper deals with a problem of choosing the proper constitutive relationships which according to the authors are equally important in obtaining correct and reasonable results. This problem is illustrated by an example of dynamic calculations of fully saturated non-cohesive soils where liquefaction phenomenon is most likely to occur.</p></abstract>

Computer Aided Engineering (CAE) is commonly used in modern design of the various types of structures. There are two main issues/aspects that should be consider while using CAE in Geotechnics: the basic theory and material model. The paper deals with a problem of choosing the proper constitutive relationships which according to the authors are equally important in obtaining correct and reasonable results. This problem is illustrated by an example of dynamic calculations of fully saturated non-cohesive soils where liquefaction phenomenon is most likely to occur.

Liquefaction mechanism induced by dynamic excitation modeled in Plaxis AE with the use of UBC and MOHR–coulomb constitutive relationships

Studia Geotechnica et Mechanica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Computer Aided Engineering (CAE) is commonly used in modern design of the various types of structures. There are two main issues/aspects that should be...

Liquefaction mechanism induced by dynamic excitation modeled in Plaxis AE with the use of UBC and MOHR–coulomb constitutive relationships

Publicado en línea: 18 abr 2016

Páginas: 123 - 133

DOI: https://doi.org/10.1515/sgem-2016-0013

Palabras clave
liquefaction, constitutive relationships, UBC Sand model, Mohr–Coulomb model, numerical modeling in Plaxis

© 2016 Anna Borowiec et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Liquefaction mechanism induced by dynamic excitation modeled in Plaxis AE with the use of UBC and MOHR–coulomb constitutive relationships

Publicado en línea: 18 abr 2016

Páginas: 123 - 133

DOI: https://doi.org/10.1515/sgem-2016-0013

Palabras claveliquefaction, constitutive relationships, UBC Sand model, Mohr–Coulomb model, numerical modeling in Plaxis

© 2016 Anna Borowiec et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
liquefaction, constitutive relationships, UBC Sand model, Mohr–Coulomb model, numerical modeling in Plaxis