<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The influence of die wall lubrication during warm die compaction on densification, microstructure and mechanical properties of three low alloy ferrous powders was investigated. Specimens were sintered at 1250°C. Die wall lubrication leads to higher green and sintered density and enhances the dimensional stability. It does not affect the microstructure of the matrix, while pores are smaller and more rounded than in bulk lubricated specimens. In TRS tests, both strength and deformation are higher in die wall lubricated specimens than bulk lubricated ones.</p>
</abstract>

The influence of die wall lubrication during warm die compaction on densification, microstructure and mechanical properties of three low alloy ferrous powders was investigated. Specimens were sintered at 1250°C. Die wall lubrication leads to higher green and sintered density and enhances the dimensional stability. It does not affect the microstructure of the matrix, while pores are smaller and more rounded than in bulk lubricated specimens. In TRS tests, both strength and deformation are higher in die wall lubricated specimens than bulk lubricated ones.

Die Wall - Vs. Bulk Lubrication in Warm Die Compaction: Density, Microstructure and Mechanical Properties of Three Low Alloyed Steels

TFM SpA, via del Concilio 3, 35035 Lissaro di Mestrino (PD),

Powder Metallurgy Progress

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The influence of die wall lubrication during warm die compaction on densification, microstructure and mechanical properties of three low alloy ferrous powders...

Die Wall - Vs. Bulk Lubrication in Warm Die Compaction: Density, Microstructure and Mechanical Properties of Three Low Alloyed Steels

Publicado en línea: 15 jun 2020

Páginas: 44 - 52

DOI: https://doi.org/10.1515/pmp-2019-0005

Palabras clave
die wall lubrication, warm die compaction

© 2019 M. Zadra et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Die Wall - Vs. Bulk Lubrication in Warm Die Compaction: Density, Microstructure and Mechanical Properties of Three Low Alloyed Steels

Publicado en línea: 15 jun 2020

Páginas: 44 - 52

DOI: https://doi.org/10.1515/pmp-2019-0005

Palabras clavedie wall lubrication, warm die compaction

© 2019 M. Zadra et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
die wall lubrication, warm die compaction