Testing the rocks loosening process by undercutting anchors

[1]ACI Committee 355. (1991). State-of-the-art report on anchorage to concrete (ACI 355.1R-91). Reapproved 1997. Detroit, USA: American Concrete Institute.ACI Committee 3551991State-of-the-art report on anchorage to concrete (ACI 355.1R-91)Reapproved 1997.Detroit, USAAmerican Concrete InstituteSearch in Google Scholar

[2]Ashour, A., & Alqedra, M. (2005). Concrete breakout strength of single anchors in tension using neural networks. Advances in Engineering Software, 36(2), 87–97.AshourA.AlqedraM.2005Concrete breakout strength of single anchors in tension using neural networksAdvances in Engineering Software362879710.1016/j.advengsoft.2004.08.001Search in Google Scholar

[3]Brincker, R., Ulfkjær, J. P., Adamsen, P., Langvad, L., & Toft, R. (1995). Analytical Model for Hook Anchor Pull-out. In R. Widmann (Ed.), Proceedings of the International Symposium on Anchors in Theory and Practice: Salzburg, Austria, 9–10 october 1995 (pp. 3–15)BrinckerR.UlfkjærJ. P.AdamsenP.LangvadL.ToftR.1995Analytical Model for Hook Anchor Pull-outInWidmannR.(Ed.),Proceedings of the International Symposium on Anchors in Theory and PracticeSalzburg, Austria9–10 october 1995315Search in Google Scholar

[4]Cebula, D. (2015). Wyniki badań dołowych technologii mechanicznego odspajania skał. In Nowoczesne metody eksploatacji węgla i skał zwięzłych: Monografia (The results of underground testing of mechanical rock break technology. Modern methods of coal and solid rock mining. Monograph. – in polish) (pp.212–222). Kraków: Akademia Górniczo-Hutnicza im. Stanisława Staszica.CebulaD.2015Wyniki badań dołowych technologii mechanicznego odspajania skałInNowoczesne metody eksploatacji węgla i skał zwięzłych: Monografia (The results of underground testing of mechanical rock break technology. Modern methods of coal and solid rock mining. Monograph. – in polish)212222KrakówAkademia Górniczo-Hutnicza im. Stanisława StaszicaSearch in Google Scholar

[5]CEN/TC250, “EN1992-4 - Eurocode 2: Design of concrete structures - Part 4: Design of fastenings for use in concrete,” 2018.CEN/TC250, “EN1992-4 - Eurocode 2: Design of concrete structures - Part 4: Design of fastenings for use in concrete,”2018Search in Google Scholar

[6]CEN/TS 1992-4-1: Design of fastenings for use in concrete - Part 4-1: General, CEN, Brussels, 2009.CEN/TS 1992-4-1: Design of fastenings for use in concrete - Part 4-1: GeneralCENBrussels2009Search in Google Scholar

[7]Comite Euro-International du Beton (CEB). (1994). Fastenings to concrete and masonry structures. London, England: Thomas Telford Services Ltd.Comite Euro-International du Beton (CEB)1994Fastenings to concrete and masonry structuresLondon, EnglandThomas Telford Services Ltd10.1680/ftcams.35423Search in Google Scholar

[8]Drwięga, A., et. al. (2014). Sprawozdanie za rok 2014 z realizacji projektu INREQ (Report for 2014 on the implementation of the INREQ project – in polish),. Unpublished Report. Gliwice: ITG KOMAG.DrwięgaA.2014Sprawozdanie za rok 2014 z realizacji projektu INREQ (Report for 2014 on the implementation of the INREQ project – in polish)Unpublished Report.GliwiceITG KOMAGSearch in Google Scholar

[9]Fuchs, W., Eligehausen, R., Breen, J.E. (1995). Concrete capacity design (CCD) approach for fastening to concrete. ACI Structure Journal, 92 (1), 73–94.FuchsW.EligehausenR.BreenJ.E.1995Concrete capacity design (CCD) approach for fastening to concreteACI Structure Journal921739410.14359/1533Search in Google Scholar

[10]Gontarz, J., Podgórski, J., Jonak, J., Kalita, M., & Siegmund, M. (2019). Comparison between numerical analysis and actual results for a pull-out test. Engineering Transactions, 67(3), 311–331. doi:10.24423/EngTrans.1005.20190815GontarzJ.PodgórskiJ.JonakJ.KalitaM.SiegmundM.2019Comparison between numerical analysis and actual results for a pull-out testEngineering Transactions67331133110.24423/EngTrans.1005.20190815Open DOISearch in Google Scholar

[11]Gontarz, J., Podgórski, J., Siegmund, M. (2017). Comparison of crack propagation analyses in a pull-out test: AIP Conference Proceedings. 1922. doi: 10.1063/1.5019141GontarzJ.PodgórskiJ.SiegmundM.2017Comparison of crack propagation analyses in a pull-out test: AIP Conference Proceedings192210.1063/1.5019141Open DOISearch in Google Scholar

[12]Hariyadi, Munemoto, S., & Sonoda, Y. (2017). Experimental analysis of anchor bolt in concrete under the pull-out loading. Paper presented at the Procedia Engineering, 171 926–933. doi:10.1016/j.proeng.2017.01.391HariyadiMunemotoS.SonodaY.2017Experimental analysis of anchor bolt in concrete under the pull-out loadingPaper presented at the Procedia Engineering17192693310.1016/j.proeng.2017.01.391Open DOISearch in Google Scholar

[13]Hilti. (2014). Anchor Fastening: Technology Manual, 09. Retrieved from https://www.hilti.group/content/dam/documents/pdf/a1/singapore/thailand-products-catalog/Thailand-Anchor%20Fastening%20Technology%20Manual-th.pdfHilti2014Anchor Fastening: Technology Manual09. Retrieved from https://www.hilti.group/content/dam/documents/pdf/a1/singapore/thailand-products-catalog/Thailand-Anchor%20Fastening%20Technology%20Manual-th.pdfSearch in Google Scholar

[14]Jonak, J., & Siegmund, M. (2019). FEM 3D analysis of rock cone failure range during pull-out of undercut anchors. Paper presented at the IOP Conference Series: Materials Science and Engineering, 710(1) doi:10.1088/1757-899X/710/1/012046JonakJ.SiegmundM.2019FEM 3D analysis of rock cone failure range during pull-out of undercut anchorsPaper presented at the IOP Conference Series: Materials Science and Engineering710110.1088/1757-899X/710/1/012046Open DOISearch in Google Scholar

[15]Jonak, J., Siegmund, M., et al. (2018). Sprawozdanie z realizacji zadania 2 projektu RODEST (Report on implementation of tasks 2 of the RODEST project – in polish), Unpublished Research Paper. Gliwice: ITG KOMAG.JonakJ.SiegmundM.2018Sprawozdanie z realizacji zadania 2 projektu RODEST (Report on implementation of tasks 2 of the RODEST project – in polish)Unpublished Research Paper.GliwiceITG KOMAGSearch in Google Scholar

[16]Kalita, M., & Prostański, D. (2012). Technologia drążenia tuneli ratowniczych metodą niszczenia spójności skał. (Technology of rescue tunneling by use of rock cohesion damaging method – in polish) Przegląd Górniczy, 12. 86–91. 1KalitaM.ProstańskiD.2012Technologia drążenia tuneli ratowniczych metodą niszczenia spójności skał. (Technology of rescue tunneling by use of rock cohesion damaging method – in polish)Przegląd Górniczy1286911Search in Google Scholar

[17]Klich, A. Et al. (1998). Niekonwencjonalne techniki urabiania skał (Unconventional rock mining techniques – in polish). Katowice: Wydawnictwo Śląsk.KlichA.1998Niekonwencjonalne techniki urabiania skał (Unconventional rock mining techniques – in polishKatowiceWydawnictwo ŚląskSearch in Google Scholar

[18]Nilforoush, R. (2019)- A Refined Model for Predicting Concrete-Related Failure Load of Tension Loaded Cast-in-Place Headed Anchors in Uncracked Concrete. Nordic Concrete Research Volume 60 (2019), (pp. 105–129) doi:10.2478/ncr-2019-0091NilforoushR.2019A Refined Model for Predicting Concrete-Related Failure Load of Tension Loaded Cast-in-Place Headed Anchors in Uncracked ConcreteNordic Concrete Research60201910512910.2478/ncr-2019-0091Open DOISearch in Google Scholar

[19]Piccinin, R.; Ballarini, R.; Cattaneo, S. Pullout Capacity of Headed Anchors in Prestressed Concrete. Journal of Engineering Mechanics 2012, 138, 877–887.PiccininR.BallariniR.CattaneoS.Pullout Capacity of Headed Anchors in Prestressed ConcreteJournal of Engineering Mechanics201213887788710.1061/(ASCE)EM.1943-7889.0000395Search in Google Scholar

[20]Siegmund, M., & Jonak, J. (2017). Analiza wyników badań wstępnych oraz określenie kierunku dalszych prac badawczych technologii drążenia tuneli ratowniczych metodą mechanicznego odspojenia. Analysis of the results of preliminary studies and determination of direction of further research work on technology of drilling the rescue tunnels by the method of mechanical loosening - in polish), Cuprum, 1, 57–71SiegmundM.JonakJ.2017Analiza wyników badań wstępnych oraz określenie kierunku dalszych prac badawczych technologii drążenia tuneli ratowniczych metodą mechanicznego odspojeniaAnalysis of the results of preliminary studies and determination of direction of further research work on technology of drilling the rescue tunnels by the method of mechanical loosening - in polish), Cuprum15771Search in Google Scholar

[21]Siegmund, M., & Jonak, J. (2019). Analysis of the process of loosening the rocks with different strength properties using the undercutting bolts. Paper presented at the IOP Conference Series: Materials Science and Engineering, 679(1) doi:10.1088/1757-899X/679/1/012014SiegmundM.JonakJ.2019Analysis of the process of loosening the rocks with different strength properties using the undercutting boltsPaper presented at the IOP Conference Series: Materials Science and Engineering679110.1088/1757-899X/679/1/012014Open DOISearch in Google Scholar

[22]Subramanian, N. Recent developments in the design of anchor bolts, The IndianConcrete Journal, July 2000, Vol. 74, No. 7, pp. 407–414.SubramanianN.Recent developments in the design of anchor boltsThe IndianConcrete JournalJuly2000747407414Search in Google Scholar

[23]Tan, E. L., Varsani, H., Liao, F. Y. (2019). Experimental study on demountable steel-concrete connectors subjected to combined shear and tension. Engineering Structures, 183, 110–123. doi: 10.1016/j.engstruct.2018.12.08TanE.L.VarsaniH.LiaoF.Y.2019Experimental study on demountable steel-concrete connectors subjected to combined shear and tensionEngineering Structures18311012310.1016/j.engstruct.2018.12.08Open DOISearch in Google Scholar

[24]Tomiczek, K. (2017–2018). Badania wytrzymałościowe wybranych skał magmowych i osadowych: Raporty z badań dla ITG KOMAG (Strength tests of selected igneous and sedimentary rocks. Research reports for ITG KOMAG – in polish) (NB-363/RG4/2017, NB-11/RG4/2017, NB-117/RG4/2018, NB 266/RG-4/2018). Unpublished Research Reports. Gliwice: Politechnika Śląska.TomiczekK.2017–2018Badania wytrzymałościowe wybranych skał magmowych i osadowych: Raporty z badań dla ITG KOMAG (Strength tests of selected igneous and sedimentary rocks. Research reports for ITG KOMAG – in polish)(NB-363/RG4/2017, NB-11/RG4/2017, NB-117/RG4/2018, NB 266/RG-4/2018). Unpublished Research ReportsGliwicePolitechnika ŚląskaSearch in Google Scholar