<abstract xmlns="http://www.w3.org/1999/xhtml">This paper evaluates the possibility of using artificial aggregates from blast furnace slag, considered industrial waste, which can replace, in a certain dosage, the natural aggregates in the composition of an AB 22,4 asphalt mixture. Furthermore, it is presented the possibility to replace the usual filler with powders from industrial wastes such as the desulphurization waste, generated by the combustion of the energetic coal.Laboratory studies and researches are carried out according to prescribed techniques. For this purpose, for the evaluation of the performance of the asphalt mixture recipes will be evaluated by static and dynamic tests as described in AND 605: 2016.The results of this study show the possibility of using asphalt mixtures with different dosages of industrial wastes in composition.The results obtained from the laboratory tests have shown that materials from industrial waste can be used in the design of asphalt mixtures with the purpose of replacing natural materials, used in certain dosages, which demonstrates good behavior in interaction with the usual bituminous binder.</abstract>

This paper evaluates the possibility of using artificial aggregates from blast furnace slag, considered industrial waste, which can replace, in a certain dosage, the natural aggregates in the composition of an AB 22,4 asphalt mixture. Furthermore, it is presented the possibility to replace the usual filler with powders from industrial wastes such as the desulphurization waste, generated by the combustion of the energetic coal.Laboratory studies and researches are carried out according to prescribed techniques. For this purpose, for the evaluation of the performance of the asphalt mixture recipes will be evaluated by static and dynamic tests as described in AND 605: 2016.The results of this study show the possibility of using asphalt mixtures with different dosages of industrial wastes in composition.The results obtained from the laboratory tests have shown that materials from industrial waste can be used in the design of asphalt mixtures with the purpose of replacing natural materials, used in certain dosages, which demonstrates good behavior in interaction with the usual bituminous binder.

Using the Industrial Wastes in the Base Layer of Pavement

Technical University of Civil Engineering Bucharest

Romanian Journal of Transport Infrastructure

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Using the Industrial Wastes in the Base Layer of Pavement"}

This paper evaluates the possibility of using artificial aggregates from blast furnace slag, considered industrial waste, which can replace, in a certain...

Using the Industrial Wastes in the Base Layer of Pavement

Online veröffentlicht: 05. Juni 2020

Seitenbereich: 1 - 15

DOI: https://doi.org/10.2478/rjti-2019-0007

Schlüsselwörter
ecological asphalt mixture, industrial waste, blast furnace slag aggregates, calcium sulphate filler

© 2019 Lixandru Cătălina Georgiana et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Using the Industrial Wastes in the Base Layer of Pavement

Online veröffentlicht: 05. Juni 2020

Seitenbereich: 1 - 15

DOI: https://doi.org/10.2478/rjti-2019-0007

Schlüsselwörterecological asphalt mixture, industrial waste, blast furnace slag aggregates, calcium sulphate filler

© 2019 Lixandru Cătălina Georgiana et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
ecological asphalt mixture, industrial waste, blast furnace slag aggregates, calcium sulphate filler