<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The objective of this paper is to design and implement a logic circuit prober to display truth tables of a three input combinational logic circuit. The truth table is to be as “1” and “0” on an ordinary 60 MHz oscilloscope. This paper meets this objective by using Lissajous Patterns to plot a “0” or a “1” on the oscilloscope screen. To plot a “0” on the oscilloscope screen, two sinusoidal signals in quadrature are supplied to the two inputs of the oscilloscope with the scope set to X-Y mode. To plot a “1” on the oscilloscope, only the signal to the Y input is allowed to reach the oscilloscope screen. To display all the 32 patterns required to obtain a three input truth table, two staircase waveforms are employed. The staircase waveforms, one eight-step and the other four-step, are added to the two sinusoidal signals to shift the patterns along the X and Y directions to produce all the 32 patterns.</p></abstract>

The objective of this paper is to design and implement a logic circuit prober to display truth tables of a three input combinational logic circuit. The truth table is to be as “1” and “0” on an ordinary 60 MHz oscilloscope. This paper meets this objective by using Lissajous Patterns to plot a “0” or a “1” on the oscilloscope screen. To plot a “0” on the oscilloscope screen, two sinusoidal signals in quadrature are supplied to the two inputs of the oscilloscope with the scope set to X-Y mode. To plot a “1” on the oscilloscope, only the signal to the Y input is allowed to reach the oscilloscope screen. To display all the 32 patterns required to obtain a three input truth table, two staircase waveforms are employed. The staircase waveforms, one eight-step and the other four-step, are added to the two sinusoidal signals to shift the patterns along the X and Y directions to produce all the 32 patterns.

Design of Combinational Logic Circuit Prober

Land Forces Academy Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Design of Combinational Logic Circuit Prober"}

The objective of this paper is to design and implement a logic circuit prober to display truth tables of a three input combinational logic circuit. The truth...

Design of Combinational Logic Circuit Prober

Online veröffentlicht: 21. Dez. 2019

Seitenbereich: 317 - 325

DOI: https://doi.org/10.2478/raft-2019-0040

Schlüsselwörter
Logic circuit prober, truth table, Lissajous patterns

© 2019 Mohanad Abdulhamid et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Design of Combinational Logic Circuit Prober

Online veröffentlicht: 21. Dez. 2019

Seitenbereich: 317 - 325

DOI: https://doi.org/10.2478/raft-2019-0040

SchlüsselwörterLogic circuit prober, truth table, Lissajous patterns

© 2019 Mohanad Abdulhamid et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
Logic circuit prober, truth table, Lissajous patterns