<abstract xmlns="http://www.w3.org/1999/xhtml">Nanocrystalline zinc sulfide thin films were prepared on glass substrates by chemical bath deposition method using aqueous solutions of zinc chloride, thiourea ammonium hydroxide along with non-toxic complexing agent trisodium citrate in alkaline medium at 80 °C. The effect of deposition time and annealing on the properties of ZnS thin films was investigated by X-ray diffraction, scanning electron microscopy, optical transmittance spectroscopy and four-point probe method. The X-ray diffraction analysis showed that the samples exhibited cubic sphalerite structure with preferential orientation along 〈2 0 0〉 direction. Scanning electron microscopy micrographs revealed uniform surface coverage, UV-Vis (300 nm to 800 nm) spectrophotometric measurements showed transparency of the films (transmittance ranging from 69 % to 81 %), with a direct allowed energy band gap in the range of 3.87 eV to 4.03 eV. After thermal annealing at 500 °C for 120 min, the transmittance increased up to 87 %. Moreover, the electrical conductivity of the deposited films increased with increasing of the deposition time from 0.35 × 10−4 Ω·cm−1 to 2.7 × 10−4 Ω·cm−1.</abstract>

Nanocrystalline zinc sulfide thin films were prepared on glass substrates by chemical bath deposition method using aqueous solutions of zinc chloride, thiourea ammonium hydroxide along with non-toxic complexing agent trisodium citrate in alkaline medium at 80 °C. The effect of deposition time and annealing on the properties of ZnS thin films was investigated by X-ray diffraction, scanning electron microscopy, optical transmittance spectroscopy and four-point probe method. The X-ray diffraction analysis showed that the samples exhibited cubic sphalerite structure with preferential orientation along 〈2 0 0〉 direction. Scanning electron microscopy micrographs revealed uniform surface coverage, UV-Vis (300 nm to 800 nm) spectrophotometric measurements showed transparency of the films (transmittance ranging from 69 % to 81 %), with a direct allowed energy band gap in the range of 3.87 eV to 4.03 eV. After thermal annealing at 500 °C for 120 min, the transmittance increased up to 87 %. Moreover, the electrical conductivity of the deposited films increased with increasing of the deposition time from 0.35 × 10−4 Ω·cm−1 to 2.7 × 10−4 Ω·cm−1.

Deposition time and annealing effects on morphological and optical properties of ZnS thin films prepared by chemical bath deposition

ICTEAM/Université Catholique de Louvain (UCL)

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Nanocrystalline zinc sulfide thin films were prepared on glass substrates by chemical bath deposition method using aqueous solutions of zinc chloride, thiourea...

Deposition time and annealing effects on morphological and optical properties of ZnS thin films prepared by chemical bath deposition

Online veröffentlicht: 18. Okt. 2019

Seitenbereich: 404 - 416

Eingereicht: 12. Mai 2018

Akzeptiert: 10. Okt. 2018

DOI: https://doi.org/10.2478/msp-2019-0043

Schlüsselwörter
CBD, ZnS, complexing agent, stirring, annealing, free buffer layer

© 2019 N. Chabou et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Deposition time and annealing effects on morphological and optical properties of ZnS thin films prepared by chemical bath deposition

Online veröffentlicht: 18. Okt. 2019

Seitenbereich: 404 - 416

Eingereicht: 12. Mai 2018

Akzeptiert: 10. Okt. 2018

DOI: https://doi.org/10.2478/msp-2019-0043

SchlüsselwörterCBD, ZnS, complexing agent, stirring, annealing, free buffer layer

© 2019 N. Chabou et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
CBD, ZnS, complexing agent, stirring, annealing, free buffer layer