[
Bathias, C., 1999. There is no infinite fatigue life in metallic materials, Fatigue Fract. Eng. Mater. Struct. 22/7, 559-565.
]Search in Google Scholar
[
Bathias, C., 2006. Piezoelectric fatigue testing machines and devices, Int. J. Fatigue. 28, 1438-1445
]Search in Google Scholar
[
Bathias, C., Paris, P., C., 2005. Gigacycle Fatigue in Mechanical Practice, M. Delaker, New York.
]Search in Google Scholar
[
Belan, J., Kuchariková, L., Tillová, E., Chalupová, M., 2019. Three-Point Bending Fatigue Test of TiAl6V4 Titanium Alloy at Room Temperature, Advances in Materials Science and Engineering, 2019, Art. No.: 2842416. DOI: 10.1155/2019/2842416
]Search in Google Scholar
[
Bokůvka, O., Jambor, M., Hrček, S., Šteininger, J., Nový, F., Trško, L., 2019. Design of shaft respecting the fatigue limit for ultra-high number of cycles, Period. Polyt. – Transport Eng., 47/1, 6-12.
]Search in Google Scholar
[
Bokůvka, O., Nicoletto, G., Kunz, L., Palček, P., Chalupová, M., 2002. Low and High Frequency Fatigue Testing, EDIS ŽU Žilina.
]Search in Google Scholar
[
Bokůvka, O., Nicoletto, G., Guagliano, M., Kunz, L., Palček, P., Nový, F., Chalupová, M., 2014. Fatigue of Materials at Low and High Frequency Loading, EDIS ŽU Žilina.
]Search in Google Scholar
[
Faturík, L., Hrček, S., Trško, L., Bokůvka, O., 2014. Comparison of Structural Design in High and Ultra-High Cycle Fatigue Region, Trans. of FAMENA, 38/4, 1-12.
]Search in Google Scholar
[
Hőppel, H., W., Prell, M., May, L. Gőken, M., 2010. Influence of grain size and precipitates on the fatigue lives and deformation mechanisms in the VHCF regime, Procedia Eng., 1025-2034.
]Search in Google Scholar
[
Chapetti, M. D., 2010. Prediction of threshold for very high cycle fatigue (N > 107 cycles), Procedia Eng. 2, 257-264.
]Search in Google Scholar
[
Kazymyrovich, V., 2009. Very High Cycle Fatigue of Engineering Materials (a literature review), Fac. of Technol. And Sicence, Materials Engineering, Karlstads Universitet.
]Search in Google Scholar
[
Lukáš, P., Kunz, L., Navrátilová, L., Bokůvka, O., 2011. Fatigue damage of ultra-fine – grain cooper in very-high cycles fatigue region, Mat. Sci. & Eng. – A., 528, 7036-7040.
]Search in Google Scholar
[
Nový, F., Činčala, M., Kopas, P., Bokůvka, O., 2007. Mechanisms of high-strength structural material fatigue failure in ultra-wide life region, Mat. Sci. & Eng. – A., 462/1-2, 189-192.
]Search in Google Scholar
[
Nový, F., Ulewicz, R., Bokůvka, O., Trško, L., Lago, J., 2016. Reliability and safety of structural elements in the gigacycle region of loading, Communications – Scientific Lett. of the University of Žilina, 20/3, 15-18.
]Search in Google Scholar
[
Ritchie, R. O., 1981. Application of Fracture Mechanics to Fatigue Crack Propagation, University of California, USA.
]Search in Google Scholar
[
Skočovský, P., Palček, P., Konečná, R., Várkoly, L., 2000. Structural Materials, EDIS ŽU Žilina (in Slovak).
]Search in Google Scholar
[
Stanzl-Tschegg, S. E., 1999. Fracture mechanisms at ultrasonic frequencies, Fatigue Fract. Eng. Mater. Struct., 22/7, 567-579.
]Search in Google Scholar
[
Stanzl-Tschegg, S. E., Mayer, H., 2001. Fatigue in the Very High Cycle Regime, Proc. Int. Conf. Vienna, Austria.
]Search in Google Scholar
[
Trško, L., Nový, F., Bokůvka, O., Jambor, M., 2018. Ultrasonic fatigue testing in the tension-compression mode, J. Vis. Exp. (133), e 57007.
]Search in Google Scholar
[
Ulewicz, R., Mazur, M., 2013. Fatigue testing of structural steels as a factor of safety of technical facilities maintenance, Prod. Eng. Arch., 1(1), 32-34.
]Search in Google Scholar
[
Vaško, A., Belan, J., Kuchariková, L., Tillová, E., 2017. Low and high frequency fatigue tests of nodular cast irons, Metalurgija, 56, 1-2, 25-28.
]Search in Google Scholar
, 