<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper presents the results of a study investigating the effect of slide burnishing on the surface roughness, surface layer microhardness and fatigue life of Ti6Al2Mo2Cr titanium alloy parts. The burnishing process was performed with the use of a diamond tip tool. Different machining fluids were used as machining media. Prior to burnishing, the samples were subjected to turning. The burnishing process led to reduced surface roughness (average roughness Ra decreased by 3.5 times and roughness Rz decreased by 2.5 times) as well as increased surface layer microhardness (microhardness maximum increase by 12%) and fatigue life of the tested parts. A relationship between the machining medium and the burnishing effects was also observed. The addition of a surface-active polymethyl methacrylate solution to the machining medium led to an increase in the surface layer microhardness and fatigue life of the workpiece.</p></abstract>

The paper presents the results of a study investigating the effect of slide burnishing on the surface roughness, surface layer microhardness and fatigue life of Ti6Al2Mo2Cr titanium alloy parts. The burnishing process was performed with the use of a diamond tip tool. Different machining fluids were used as machining media. Prior to burnishing, the samples were subjected to turning. The burnishing process led to reduced surface roughness (average roughness Ra decreased by 3.5 times and roughness Rz decreased by 2.5 times) as well as increased surface layer microhardness (microhardness maximum increase by 12%) and fatigue life of the tested parts. A relationship between the machining medium and the burnishing effects was also observed. The addition of a surface-active polymethyl methacrylate solution to the machining medium led to an increase in the surface layer microhardness and fatigue life of the workpiece.

Effect of Slide Burnishing on the Surface Layer and Fatigue Life of Titanium Alloy Parts

Faculty of Mechanical Engineering, Department of Production Engineering

Advances in Materials Science

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper presents the results of a study investigating the effect of slide burnishing on the surface roughness, surface layer microhardness and fatigue life...

Effect of Slide Burnishing on the Surface Layer and Fatigue Life of Titanium Alloy Parts

Online veröffentlicht: 31. Dez. 2019

Seitenbereich: 35 - 45

DOI: https://doi.org/10.2478/adms-2019-0020

Schlüsselwörter
slide burnishing, fatigue life, titanium alloy, surface layer

© 2019 K. Zaleski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Effect of Slide Burnishing on the Surface Layer and Fatigue Life of Titanium Alloy Parts

Online veröffentlicht: 31. Dez. 2019

Seitenbereich: 35 - 45

DOI: https://doi.org/10.2478/adms-2019-0020

Schlüsselwörterslide burnishing, fatigue life, titanium alloy, surface layer

© 2019 K. Zaleski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
slide burnishing, fatigue life, titanium alloy, surface layer