<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The paper presents results of the numerical analysis of the fire damper used in ventilation systems under the earthquake loading. The research was conducted in accordance with the recommendations of the Nuclear Safety Standards Commission. The aim of the analysis was to examine the fire damper with respect to its resistance to service loadings, structural integrity, and capability to stay operative after an earthquake. The analysis was carried out using the Finite Element Method in LS-Dyna software. The earthquake loading was modelled as accelerations, measured in three directions during the earthquake. For modelling of the materials behaviour, material models taking into account the influence of strain rate on hardening were used. The analysis consisted of three stages, which were: loading the construction with the earth gravity, earthquake simulation by loading with accelerations in three directions, and, finally, closing the fire damper. The analysis has shown that some of the construction elements undergo plastic deformations. However, the performed simulation of fire damper closing showed that despite these deformations, the device remains capable to keep its functionality and the damper closes hermetically. The results of the analysis were important design indications for the fire damper prototype.</p></abstract>

The paper presents results of the numerical analysis of the fire damper used in ventilation systems under the earthquake loading. The research was conducted in accordance with the recommendations of the Nuclear Safety Standards Commission. The aim of the analysis was to examine the fire damper with respect to its resistance to service loadings, structural integrity, and capability to stay operative after an earthquake. The analysis was carried out using the Finite Element Method in LS-Dyna software. The earthquake loading was modelled as accelerations, measured in three directions during the earthquake. For modelling of the materials behaviour, material models taking into account the influence of strain rate on hardening were used. The analysis consisted of three stages, which were: loading the construction with the earth gravity, earthquake simulation by loading with accelerations in three directions, and, finally, closing the fire damper. The analysis has shown that some of the construction elements undergo plastic deformations. However, the performed simulation of fire damper closing showed that despite these deformations, the device remains capable to keep its functionality and the damper closes hermetically. The results of the analysis were important design indications for the fire damper prototype.

Finite Element Analysis of Ventilation System Fire Damper Dynamic Time-History

Polish Maritime Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Finite Element Analysis of Ventilation System Fire Damper Dynamic Time-History"}

The paper presents results of the numerical analysis of the fire damper used in ventilation systems under the earthquake loading. The research was conducted in...

Finite Element Analysis of Ventilation System Fire Damper Dynamic Time-History

Online veröffentlicht: 13. Jan. 2018

Seitenbereich: 116 - 123

DOI: https://doi.org/10.1515/pomr-2017-0143

Schlüsselwörter
fire barriers, earthquake, finite element method

© 2018

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Finite Element Analysis of Ventilation System Fire Damper Dynamic Time-History

Online veröffentlicht: 13. Jan. 2018

Seitenbereich: 116 - 123

DOI: https://doi.org/10.1515/pomr-2017-0143

Schlüsselwörterfire barriers, earthquake, finite element method

© 2018

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
fire barriers, earthquake, finite element method