<abstract xmlns="http://www.w3.org/1999/xhtml">A series of copper substituted cobalt chromium ferrites, CuxCo1 - xCr0.5Fe1.5O4 (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) has been synthesized, by employing powder metallurgy method. Calcination of the samples has been carried out for 24 hours at 1100 °C. The resultant materials have been investigated by using a variety of techniques, including X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM)), scanning electron microscopy (SEM), and ultraviolet visible spectroscopy (UV-Vis). The XRD patterns confirmed that all compositions had a cubic spinel structure with a single phase and the lattice parameter was found to increase with increasing copper concentration. FT-IR spectroscopy has been used for studying the chemical bonds in the spinel ferrite. Shifting of the bands ν1 and ν2 has been observed. It has been revealed from VSM analysis that saturation magnetization and coercivity decrease with rising the Cu+2 doping. Magnetic properties have been explained on the basis of cation distribution. Scanning electron microscopy (SEM) has been used to study the surface morphology of prepared samples. UV-Vis analysis revealed the optical absorption of the samples. An increase in band gaps has been observed with increasing copper concentration in the sample.</abstract>

A series of copper substituted cobalt chromium ferrites, CuxCo1 - xCr0.5Fe1.5O4 (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) has been synthesized, by employing powder metallurgy method. Calcination of the samples has been carried out for 24 hours at 1100 °C. The resultant materials have been investigated by using a variety of techniques, including X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM)), scanning electron microscopy (SEM), and ultraviolet visible spectroscopy (UV-Vis). The XRD patterns confirmed that all compositions had a cubic spinel structure with a single phase and the lattice parameter was found to increase with increasing copper concentration. FT-IR spectroscopy has been used for studying the chemical bonds in the spinel ferrite. Shifting of the bands ν1 and ν2 has been observed. It has been revealed from VSM analysis that saturation magnetization and coercivity decrease with rising the Cu+2 doping. Magnetic properties have been explained on the basis of cation distribution. Scanning electron microscopy (SEM) has been used to study the surface morphology of prepared samples. UV-Vis analysis revealed the optical absorption of the samples. An increase in band gaps has been observed with increasing copper concentration in the sample.

Substitutional effect of copper on the cation distribution in cobalt chromium ferrites and their structural and magnetic properties

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

A series of copper substituted cobalt chromium ferrites, CuxCo1 - xCr0.5Fe1.5O4 (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) has been synthesized, by employing powder...

Substitutional effect of copper on the cation distribution in cobalt chromium ferrites and their structural and magnetic properties

Online veröffentlicht: 25. Juni 2018

Seitenbereich: 255 - 263

Eingereicht: 11. Jan. 2018

Akzeptiert: 07. Feb. 2018

DOI: https://doi.org/10.1515/msp-2018-0011

Schlüsselwörter
crystal structure, ferromagnetic properties, optical band gap

© 2018 Talat Zeeshan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Substitutional effect of copper on the cation distribution in cobalt chromium ferrites and their structural and magnetic properties

Online veröffentlicht: 25. Juni 2018

Seitenbereich: 255 - 263

Eingereicht: 11. Jan. 2018

Akzeptiert: 07. Feb. 2018

DOI: https://doi.org/10.1515/msp-2018-0011

Schlüsselwörtercrystal structure, ferromagnetic properties, optical band gap

© 2018 Talat Zeeshan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
crystal structure, ferromagnetic properties, optical band gap