Eco-design processes in the automotive industry

Allenby, B.R., Comrie, P.R., Graedel, T.E. 1995. Pollution prevention: matrix approaches to abridged life cycle assessment Environ Sci Technol, 29 (3), 134A-139A. DOI: 10.1021/es00003a751.10.1021/es00003a751Search in Google Scholar

Baryshnikova, N., Kiriliuk, O., Klimecka-Tatar, D. 2020. Management approach on food export expansion in the conditions of limited internal demand, Polish Journal of Management Studies, 21(2), 101-114. DOI: 10.17512/pjms.2020.21.2.0810.17512/pjms.2020.21.2.08Search in Google Scholar

Bastani, P., Heywood, J.B., Hope, C.U.S., 2012. CAFÉ Standards Potential for Meeting Light-Duty Vehicle Fuel Economy Targets, 2016-2025 MIT Energy Initiative Report; MIT: Cambridge, MA, USA.Search in Google Scholar

Bennett, D., 2010. Green operations initiatives in the automotive industry: An environmental reports analysis and benchmarking study, Benchmarking: An International Journal, 17(3), 396-420, DOI: 10.1108/14635771011049362.10.1108/14635771011049362Search in Google Scholar

Berg, S., 1997. Some aspects of LCA in the analysis of forestry operations J Clean Prod, 5(3), 211-217. DOI: 10.1016/S0959-6526(97)00040-1.10.1016/S0959-6526(97)00040-1Search in Google Scholar

Bird, M., Kochhar, A.K., 2009. Sustainable Design of Manufacturing Systems - Assessment of current practices in different parts of a multi-national automotive organization.10.3182/20090603-3-RU-2001.0156Search in Google Scholar

Bokuvka, O., Kucharikova, L., Tillova, E., 2016. Recycling and properties of recycled aluminium alloys used in the transportation industry, Transport Problems, 11(2), 117-122. DOI: 10.20858/tp.2016.11.2.11.10.20858/tp.2016.11.2.11Search in Google Scholar

Broughton, J., Lu, Y., Winfield, P. 2014. A review of innovations in disbonding techniques for repair and recycling of automotive vehicles, International Journal of Adhesion & Adhesives 50, 119-127- DOI: 10.1016/j.ijadhadh.2014.01.021.10.1016/j.ijadhadh.2014.01.021Search in Google Scholar

Cerdas, F., Herrmann, Ch., Schebek, L.. 2019. Progress in Life Cycle Assessment.Search in Google Scholar

Das, S., Jawahir, I.S., Ungureanu, C.A. 2007. Life-cycle cost analysis: Aluminum versus steel in passenger cars. In Proceedings of the TMS Conference, Orlando, FL, USA, 25 February, 11-24.Search in Google Scholar

Dobson, I.D., 1996. Life cycle assessment for painting processes: putting the VOC issue in perspective Progress in Organic Coatings, 27 (1-4), 55-58. DOI: 10.1016/0300-9440(95)00519-6.10.1016/0300-9440(95)00519-6Search in Google Scholar

European Environment Agency. 1997. Life Cycle Assessment: A guide to approaches, experiences and information sources. EC.Search in Google Scholar

Finkbeiner, M., Hoffmann, E., Kreisel, G. 1997. Environmental auditing: the functional unit in the life cycle inventory analysis of degreasing processes in the metal-processing industry Environmental Management, 21, 635-642. DOI: 10.1007/s002679900056.10.1007/s0026799000569175550Search in Google Scholar

Franz, E., Erler, F., Langer, T., Schlegel, A., Stoldt, J., Richter, M., Putz, M. 2017. Requirements and Tasks for Active Energy Management Systems in Automotive Industry, Procedia Manufacturing, 8, 175-182. DOI: 10.1016/j.promfg.2017.02.022.10.1016/j.promfg.2017.02.022Search in Google Scholar

Hines, P., Taylor, D. 2000, Going Lean, Lean Enterprise Research Centre, Cardiff, UK.Search in Google Scholar

Ingaldi, M., Czajkowska, A. 2019. Segregation and recycling of packaging waste in central Poland, IOP Conference Series: Earth and Environmental Science, 214(1):012003. DOI: 10.1088/1755-1315/214/1/01200310.1088/1755-1315/214/1/012003Search in Google Scholar

Ingaldi, M., Klimecka-Tatar, D. 2020. People’s Attitude to Energy from Hydrogen – From the Point of View of Modern Energy Tech-nologies and Social Responsibility, Energies,13, 6495. DOI:10.3390/en1324649510.3390/en13246495Search in Google Scholar

ISO 14006:2011 - Environmental Management Systems - Guidelines for Incorporating Ecodesign, 2011Search in Google Scholar

Kafa, N., Hani, Y., Mhamedi, A., 2013. Sustainability Performance Measurement for Green Supply Chain Management, IFAC Proceedings Volumes, 46(24), 71-78. DOI: 10.3182/20130911-3-BR-3021.00050.10.3182/20130911-3-BR-3021.00050Search in Google Scholar

Kapustka, K., Ziegmann, G., Klimecka-Tatar, D., Ostrega, M. 2020. Identification of health risks from harmful chemical agents -review concerning bisphenol A in workplace, Production Engineering Archives, 26(2), 45-49. DOI: 10.30657/pea.2020.26.1010.30657/pea.2020.26.10Search in Google Scholar

Kishawy, H.A., Hegab, H., Saad, E., 2018. Design for Sustainable Manufacturing: Approach, Implementation, and Assessment, Sustainability, 10(10), 3604. DOI: 10.3390/su10103604.10.3390/su10103604Search in Google Scholar

Klimecka-Tatar, D, Ingaldi, M. 2020. How to indicate the areas for improvement in service process - the Knowledge Management and Value Stream Mapping as the crucial elements of the business approach, Revista Gestão & Tecnologia, 20(2), 52-74. DOI: 10.20397/2177-6652/2020.v20i2.187810.20397/2177-6652/2020.v20i2.1878Search in Google Scholar

Kobayashi, S., Plotkin, S., Ribeiro, S.K.. 2009. Energy efficiency technologies for road vehicles, Energy Efficiency, 2(2), 125-137. DOI: 10.1007/s12053-008-9037-310.1007/s12053-008-9037-3Search in Google Scholar

Kuzman, M.K., Panwar, R., Zbašnik-Senegačnik, M. 2016. A preliminar characterization of eco-innovators and eco-design in Slovenia, Drvna industrija, 67(3), 289-298. DOI: 10.5552/drind.2016.154610.5552/drind.2016.1546Search in Google Scholar

Mamalis, A.G., Spentzas, K., Mamali, A.A. 2013. The impact of automotive industry and its supply chain to climate change: Somme techno-economic aspects, European Transport Research Review, 5(1). DOI: 10.1007/s12544-013-0089-x10.1007/s12544-013-0089-xSearch in Google Scholar

Mayyas, A.; Qattawi, A.; Omar, M.; Shan, D. 2012. Design for sustainability in automotive industry: A comprehensive review, 2012, Renewable and Sustainable Energy Reviews, 16, 1845-1862. DOI: 10.1016/j.rser.2012.01.012.10.1016/j.rser.2012.01.012Search in Google Scholar

Nieuwenhuis, P., Katsifou, E. 2015. More sustainable automotive production through understanding decoupling points in leagile manufacturing, Journal of Cleaner Production, 95, 232-241. DOI: 10.1016/j.jclepro.2015.02.08410.1016/j.jclepro.2015.02.084Search in Google Scholar

Obrecht, M., Kazancoglu, Y., Denac, M. 2020. Integrating Social Dimensions into Future Sustainable Energy Supply Networks, Int. J. Environ. Res. Public Health, 17, 6230. DOI:10.3390/ijerph1717623010.3390/ijerph17176230Search in Google Scholar

Otola, I., Grabowska, M. 2009. Initial capital func-tions and possibilities of protecting them by re-sources capital, Evidence of polish joint-stock companies, International Research Journal of Fi-nance and Economics, 30, 190-210, http://ssrn.com/abstract=1815011.Search in Google Scholar

Pahlevani, F., Dippenaar, R., Gorjizadeh, N., Cholake, S.T., Hossain, R., Kumar, R., Sahajwalla, V. 2017. Surface Modification of Steel Using Automotive Waste as Raw Materials, Procedia Manufacturing, 7, 287-394. DOI: 10.1016/j.promfg.2016.12.007.10.1016/j.promfg.2016.12.007Search in Google Scholar

Panza, G.B., Okano, M.T., Otola, I. 2019. Social enterprises in Brazil and Poland: Comparative analysis, International Journal of Supply Chain Management, 8(4), 990-996.Search in Google Scholar

Petit, S., 2017. World Vehicle Population Rose 4.6% in 2016, Wards Intelligence.Search in Google Scholar

Piechocka, K., Szeretucha, C., et al., 2018. Automotive Industry Report, 2018/2019.Search in Google Scholar

Plouffe, S., Lanoie, P., Berneman, P., Vernier, M.F., 2011. Economic benefits tied to ecodesign, Journal of Cleaner Production, 19, 573-579. DOI: 10.1016/j.jclepro.2010.12.00310.1016/j.jclepro.2010.12.003Search in Google Scholar

Robertson, J.G.S., Wood, J.R., Ralph, B., Fenn, R., 1997. Analysis of lead/acid battery life-cycle factors: their impact on society and the lead industry, Journal of Power Sources, 67(1-2), 225-236. DOI: 10.1016/S0378-7753(97)02554-8.10.1016/S0378-7753(97)02554-8Search in Google Scholar

Roth, R., Clark, J., Kelkar, A. 2001. Automobile bodies: can aluminium be an economical alternative to steel, JOM, 53(8), 28-32. DOI: 10.1007/s11837-001-0131-7.10.1007/s11837-001-0131-7Search in Google Scholar

Roy, R. 1994. The evolution of ecodesign. Technovation, 14(6), 363-80. DOI: 10.1016/0166-4972(94)90016-710.1016/0166-4972(94)90016-7Search in Google Scholar

Sonoc, A., Jeswiet, J., Soo, V.K., 2015. Opportunities to Improve Recycling of Automotive Lithium Ion Batteries, Procedia CIRP, 29, 752-757. DOI: 10.1016/j.procir.2015.02.039.10.1016/j.procir.2015.02.039Search in Google Scholar

Szegedi, Z., Gabriel, M., Papp, I. 2017. Green supply chain awareness in the hungarian automotive industry, Polish Journal of Management Studies 16 (1), 259-268. DOI: 10.17512/pjms.2017.16.1.22.10.17512/pjms.2017.16.1.22Search in Google Scholar

Tisza, M., Czinege, I., 2018. Comparative study of the application of steels and aluminium in lightweight production of automotive parts, International Journal of Lightweight Materials and Manufacture, 1(4), 229-238. DOI: 10.1016/j.ijlmm.2018.09.001.10.1016/j.ijlmm.2018.09.001Search in Google Scholar

Ulewicz, R., Blaskova, M., 2018. Sustainable development and knowledge management from the stakeholders’ point of view, Polish Journal of Management Studies, 18(2), 363-374, DOI: 10.17512/pjms.2018.18.2.2910.17512/pjms.2018.18.2.29Search in Google Scholar

Ulewicz, R., Mazur, M., 2019. Economic Aspects of Robotization of Production Processes by Example of a Car Semi-trailers Manufacturer, Manufacturing Technology, 19(6),1054-1059. DOI: 10.21062/ujep/417.2019/a/1213-2489/MT/19/6/105410.21062/ujep/417.2019/a/1213-2489/MT/19/6/1054Search in Google Scholar

Urban, W., 2019. TOC implementation in a medium-scale manufacturing system with diverse product rooting, Production and Manufacturing Research, 7(1), 178-194.10.1080/21693277.2019.1616002Search in Google Scholar

Venkatachalam, V., Spierling, S., Endres, H.J., Siebert-Raths, A., 2018. Integrating Life Cycle Assessment and Eco-design Strategies for a Sustainable Production of Bio-based Plastics, In: Designing Sustainable Technologies, Products and Policies. DOI: 10.1007/978-3-319-66981-6_5410.1007/978-3-319-66981-6_54Search in Google Scholar

Viganò, F., Consonni, S., Grosso, M., Rigamonti, L., 2010. Material and energy recovery from Automotive Shredded Residues (ASR) via sequential gasification and combustion, Waste management, 30(1), 145-153. DOI: 10.1016/j.wasman.2009.06.00910.1016/j.wasman.2009.06.00919853430Search in Google Scholar

Vinodh, S., Jayakrishna, K. 2011. Environmental impact minimisation in an automotive component using alternative materials and manufacturing processes, Materials & Design, 32(10), 5082-5090. DOI: 10.1016/j.matdes.2011.06.025.10.1016/j.matdes.2011.06.025Search in Google Scholar

Yuce, K., Karpat, F., Yavuz, N. 2014. A Case Study: Designing for Sustainability and Reliability in an Automotive Seat Structure, Sustainability, 6(7), 4608-4631. DOI: 10.3390/su607460810.3390/su6074608Search in Google Scholar